OP282GSZ-REEL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~90°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | JFET |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | OP282 |
| Pin Count | 8 |
| Number of Channels | 2 |
| Operating Supply Current | 500μA |
| Max Supply Current | 500μA |
| Quiescent Current | 250μA |
| Slew Rate | 9V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 3pA |
| Voltage - Supply, Single/Dual (±) | 9V~36V ±4.5V~18V |
| Output Current per Channel | 12mA |
| Input Offset Voltage (Vos) | 3mV |
| Gain Bandwidth Product | 4MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 4000 kHz |
| Voltage Gain | 86.02dB |
| Average Bias Current-Max (IIB) | 0.0005μA |
| Power Supply Rejection Ratio (PSRR) | 92dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 200μV |
| Settling Time | 1.6 μs |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.0001μA |
| Dual Supply Voltage | 5V |
| Input Voltage Noise Density | 36nV/sqrt Hz |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
OP282GSZ-REEL Overview
It is packaged in an 8-SOIC (0.154, 3.90mm Width)-case that protects the operational amplifiers from damage. Op amps are J-FET types of amplifier on the chip. A Tape & Reel (TR) case is used to deliver the buffer op amp. A total of 8 terminations have been reported in the past few weeks. A total of 8 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. Instrumentation amplifier is a part of Operational Amplifier. 8 pins are included on the operational amplifiers. With regards to the offset voltage of the input, buffer amplifier is rated at 3mV. Surface Mount is the recommended mounting type for this linear amplifier. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~90°C . This op amp can operate from a supply current at 500μA. It is recommended to keep the voltage gain at 86.02dB at all times. There are a total of 2 channels available on the op amps. It is used TAPE AND REEL to pack the op amps. Buffer amplifier has a quiescent current of 250μA.
OP282GSZ-REEL Features
8 Pins
supply voltage of 15V
86.02dB voltage gain
OP282GSZ-REEL Applications
There are a lot of Analog Devices Inc. OP282GSZ-REEL Instrumentational OP Amps applications.
- Television broadcasting equipment
- single/dual op amp sum and difference circuits
- Fission chambers
- Tablets
- Video computer boards
- Communication
- pH (acidity)
- Multimedia playback equipment
- Image computer boards
- Radar
