OP285GS-REEL7
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | OP285 |
| Pin Count | 8 |
| Power Supplies | +-15V |
| Number of Channels | 2 |
| Operating Supply Current | 5mA |
| Quiescent Current | 2.5mA |
| Slew Rate | 22V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 106 dB |
| Current - Input Bias | 100nA |
| Voltage - Supply, Single/Dual (±) | 9V~44V ±4.5V~22V |
| Input Offset Voltage (Vos) | 250μV |
| Gain Bandwidth Product | 9MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 9000 kHz |
| Voltage Gain | 107.96dB |
| Average Bias Current-Max (IIB) | 0.4μA |
| Power Supply Rejection Ratio (PSRR) | 111dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 35μV |
| Settling Time | 750 ns |
| Bias Current-Max (IIB) @25C | 0.35μA |
| Input Capacitance | 7.5pF |
| Input Voltage Noise Density | 7nV/sqrt Hz |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
OP285GS-REEL7 Overview
Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. Op amps are General Purpose types of amplifier on the chip. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. It is estimated that there will be at least 8 terminations this year. There are a total of 8 pins on this op amp. I would like to remind you that this buffer op amp should be powered by an 15V battery. It should be noted that this op amp is a type of Operational Amplifier device. Linear amplifier includes 8 pins. With regards to the offset voltage of the input, buffer amplifier is rated at 250μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~85°C . Using a supply current of 5mA , this buffer op amp will be able to operate. Voltage gain should remain at 107.96dB. Op amp ic has 2 channels. The linear amplifier is packaged by using a TAPE AND REEL axis. The current is quiescent at 2.5mA.
OP285GS-REEL7 Features
8 Pins
supply voltage of 15V
107.96dB voltage gain
OP285GS-REEL7 Applications
There are a lot of Analog Devices Inc. OP285GS-REEL7 Instrumentational OP Amps applications.
- Comparator
- Test equipment
- Fission chambers
- Band-stop filter
- Micro signal measurement
- Signal amplification
- Precision measurement
- Power generator
- Signal transformation
- Broadcasting
