OP285GSZ
| Parameters | |
|---|---|
| Input Offset Voltage (Vos) | 250μV |
| Bandwidth | 9MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 9000 kHz |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.4μA |
| Power Supply Rejection Ratio (PSRR) | 111dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 35μV |
| Settling Time | 750 ns |
| Bias Current-Max (IIB) @25C | 0.35μA |
| Dual Supply Voltage | 18V |
| Input Capacitance | 7.5pF |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | OP285 |
| Pin Count | 8 |
| Power Supplies | +-15V |
| Number of Channels | 2 |
| Operating Supply Current | 5mA |
| Nominal Supply Current | 5.5mA |
| Max Supply Current | 5.5mA |
| Quiescent Current | 2.5mA |
| Slew Rate | 22V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 106 dB |
| Current - Input Bias | 100nA |
| Voltage - Supply, Single/Dual (±) | 9V~44V ±4.5V~22V |
| Supply Type | Dual |
OP285GSZ Overview
In the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. The instrumentation amplifier in this picture is of the General Purpose-type. Instrumentation amplifier is delivered in a Tube case. The number of terminations approaches 8. A total of 8 pins are attached to buffer op amp. The linear amplifier should be run at 15V at all times, so please keep that in mind when using it. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. An 8-pin op amp ic is included in the package. With regards to the offset voltage of the input, buffer amplifier is rated at 250μV. This electronic part is best mounted with type Surface Mount. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperatureUsing an 5mA supply current, this operational amplifier ics can be operated. 106.02dB should be the voltage gain. 2 channels are available on the instrumentation amplifier. There is an 2.5mA quiescent current running through op amp ic.
OP285GSZ Features
8 Pins
supply voltage of 15V
106.02dB voltage gain
OP285GSZ Applications
There are a lot of Analog Devices Inc. OP285GSZ Instrumentational OP Amps applications.
- Band-stop filter
- Radiation thermometry transducers
- Strain gauges
- Laptop
- Cinema or auditorium audio system
- Hand-held batteries
- Test equipment
- Comparator
- Active probe
- Automation control systems
