OP285GSZ-REEL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | OP285 |
| Pin Count | 8 |
| Power Supplies | +-15V |
| Number of Channels | 2 |
| Operating Supply Current | 5mA |
| Nominal Supply Current | 5.5mA |
| Quiescent Current | 2.5mA |
| Slew Rate | 22V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 106 dB |
| Current - Input Bias | 100nA |
| Voltage - Supply, Single/Dual (±) | 9V~44V ±4.5V~22V |
| Supply Type | Dual |
| Input Offset Voltage (Vos) | 250μV |
| Gain Bandwidth Product | 9MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 9000 kHz |
| Voltage Gain | 107.96dB |
| Average Bias Current-Max (IIB) | 0.4μA |
| Power Supply Rejection Ratio (PSRR) | 111dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 35μV |
| Settling Time | 750 ns |
| Bias Current-Max (IIB) @25C | 0.35μA |
| Dual Supply Voltage | 18V |
| Input Capacitance | 7.5pF |
| Input Voltage Noise Density | 7nV/sqrt Hz |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
OP285GSZ-REEL Overview
Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. Buffer amps of this type are called General Purpose-types. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. During the past two weeks, there have been close to 8 terminations. The pins on this board total to 8 in total. It would be helpful if you could remember that this op amp ic should be powered by an 15V battery. To be specific, this instrumentation amplifier is a type of Operational Amplifier. Linear amplifier includes 8 pins. Op amp rates 250μV as input offset voltage. This electronic component is recommended to be mounted using the mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. You can run this op amp ic on 5mA . Maintain 107.96dB as the voltage gain. Instrumentation amplifier has 2 channels on it. The linear amplifier is packaged by using a TAPE AND REEL axis. There is a quiescent current of 2.5mA in this operational amplifier circuit.
OP285GSZ-REEL Features
8 Pins
supply voltage of 15V
107.96dB voltage gain
OP285GSZ-REEL Applications
There are a lot of Analog Devices Inc. OP285GSZ-REEL Instrumentational OP Amps applications.
- Precision measurement
- Inverse/same-phase proportional circuit
- Professional videography
- Active probe
- Hand-held batteries
- Scintillation detectors
- Displayers for aircraft and air transportation control systems
- Measurements of Wheatstone bridge
- Biopotential
- pH (acidity)
