OP285GSZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | OP285 |
| Pin Count | 8 |
| Power Supplies | +-15V |
| Number of Channels | 2 |
| Operating Supply Current | 5mA |
| Quiescent Current | 2.5mA |
| Slew Rate | 22V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 106 dB |
| Current - Input Bias | 100nA |
| Voltage - Supply, Single/Dual (±) | 9V~44V ±4.5V~22V |
| Input Offset Voltage (Vos) | 250μV |
| Gain Bandwidth Product | 9MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 9000 kHz |
| Voltage Gain | 107.96dB |
| Average Bias Current-Max (IIB) | 0.4μA |
| Power Supply Rejection Ratio (PSRR) | 111dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 35μV |
| Settling Time | 750 ns |
| Bias Current-Max (IIB) @25C | 0.35μA |
| Input Capacitance | 7.5pF |
| Input Voltage Noise Density | 7nV/sqrt Hz |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
OP285GSZ-REEL7 Overview
Op amp is packaged in 8-SOIC (0.154, 3.90mm Width) case. An op amp ic of the General Purpose type. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. It is estimated that there will be 8 terminations in the next few months. Buffer amplifier has a total of 8 pins. It would be helpful if you could remember that this op amp ic should be powered by an 15V battery. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. Linear amplifier includes 8 pins. There is an input offset voltage of 250μV for this buffer op amp. Surface Mount is the recommended mounting type of operational amplifiers. With regard to operating temperature, op amp ranges -40°C~85°C. Using a supply current of 5mA , this buffer op amp will be able to operate. There should be no change in the voltage gain at 107.96dB. Op amp ic has 2 channels. An buffer amplifier is packed in a TAPE AND REEL-shape according to the design. Currently, linear amplifier is operating with a quiescent current of 2.5mA.
OP285GSZ-REEL7 Features
8 Pins
supply voltage of 15V
107.96dB voltage gain
OP285GSZ-REEL7 Applications
There are a lot of Analog Devices Inc. OP285GSZ-REEL7 Instrumentational OP Amps applications.
- Differentiator circuits
- Power control
- Computer workstations
- Scintillation detectors
- High-frequency data acquisition systems
- Professional videography
- High speed sample
- Hand-held batteries
- Medical instruments
- Video conversion and routing
