OP290GPZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Base Part Number | OP290 |
| Pin Count | 8 |
| Operating Supply Voltage | 28V |
| Power Supplies | +-1.5/+-15V |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Operating Supply Current | 40μA |
| Quiescent Current | 20μA |
| Supply Current-Max | 0.06mA |
| Slew Rate | 0.012V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 120 dB |
| Current - Input Bias | 4nA |
| Voltage - Supply, Single/Dual (±) | 1.6V~36V ±0.8V~18V |
| Input Offset Voltage (Vos) | 125μV |
| Bandwidth | 20 kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 20 kHz |
| Voltage Gain | 115.56dB |
| Power Supply Rejection Ratio (PSRR) | 110dB |
| Low-Offset | YES |
| Frequency Compensation | NO |
| Micropower | YES |
| Height | 3.43mm |
| Length | 9.27mm |
| Width | 7.24mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
OP290GPZ Overview
Packaged in a 8-DIP (0.300, 7.62mm) case, the buffer op amp is ready to use. Op amps are General Purpose types of amplifier on the chip. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. In recent months, the number of terminations has approached 8. A total of 8 pins are attached to buffer op amp. I would like to remind you that this buffer op amp should be powered by an 15V battery. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. An 8-pin op amp ic is included in the package. With regard to input offset voltage, instrumentation amplifier is rated at 125μV. This electronic part is best mounted with type Through Hole. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. Using a supply current of 40μA , this buffer op amp will be able to operate. There should be no change in the voltage gain at 115.56dB. In total, there are 2 circuits on this buffer amplifier. There are a total of 2 channels available on the op amps. The operating supply voltage of the buffer op amp is rated at 28V. There is an 20μA quiescent current running through op amp ic.
OP290GPZ Features
8 Pins
supply voltage of 15V
115.56dB voltage gain
OP290GPZ Applications
There are a lot of Analog Devices Inc. OP290GPZ Instrumentational OP Amps applications.
- Portable electronic products powered by batteries
- Proportional operation circuits
- single/dual op amp sum and difference circuits
- Tablets
- Signal filtering
- Commercial audio systems
- Measurements of Wheatstone bridge
- Strain gauges
- Logarithmic operation circuits
- Communication
