OP291GSZ-REEL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | OP291 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Channels | 2 |
| Operating Supply Current | 840μA |
| Quiescent Current | 420μA |
| Supply Current-Max | 1.1mA |
| Slew Rate | 0.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 30nA |
| Voltage - Supply, Single/Dual (±) | 2.7V~12V ±1.35V~6V |
| Output Current per Channel | 16mA |
| Input Offset Voltage (Vos) | 700μV |
| Gain Bandwidth Product | 3MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 3000 kHz |
| Voltage Gain | 96.9dB |
| Average Bias Current-Max (IIB) | 0.095μA |
| Power Supply Rejection Ratio (PSRR) | 110dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 8V |
| Voltage - Input Offset | 80μV |
| Settling Time | 22 μs |
| Low-Bias | NO |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.065μA |
| Programmable Power | NO |
| Wideband | NO |
| Input Voltage Noise Density | 42nV/sqrt Hz |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
OP291GSZ-REEL Overview
In the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. A General Purpose-type buffer amplifier is shown here. Linear amplifier is delivered in a Tape & Reel (TR) case. It is estimated that there will be 8 terminations in the next few months. In total, there are 8 pins on this op amp ic. This linear amplifier should be powered by an 5V battery. Instrumentation amplifier is a part of Operational Amplifier. 8 pins are available on the instrumentation amplifier. The input offset voltage is 700μV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. You can run this op amp ic on 840μA . Voltage gain should remain at 96.9dB. There are a total of 2 channels available on the op amps. On the output type, there are Rail-to-Rail different types of op amps. For packing the buffer amplifier, the TAPE AND REEL-axis is adopted. The current is quiescent at 420μA.
OP291GSZ-REEL Features
8 Pins
supply voltage of 5V
96.9dB voltage gain
Output Type: Rail-to-Rail
OP291GSZ-REEL Applications
There are a lot of Analog Devices Inc. OP291GSZ-REEL Instrumentational OP Amps applications.
- Television
- Video data acquisition
- Weighing systems
- High/low-pass filter circuit
- Instrumentation
- earphone
- Fast A/D and D/A converters
- Addition operation circuits
- Hand-held batteries
- Tablets
