OP292GSZ-REEL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | OP292 |
| Pin Count | 8 |
| Operating Supply Voltage | 28V |
| Power Supplies | +-15V |
| Number of Channels | 2 |
| Operating Supply Current | 2.8mA |
| Nominal Supply Current | 2.4mA |
| Quiescent Current | 1.4mA |
| Slew Rate | 4V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 375nA |
| Voltage - Supply, Single/Dual (±) | 4.5V~33V ±2.25V~16.5V |
| Output Current per Channel | 10.5mA |
| Input Offset Voltage (Vos) | 2mV |
| Gain Bandwidth Product | 4MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 4000 kHz |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 5μA |
| Power Supply Rejection Ratio (PSRR) | 86dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 33V |
| Voltage - Input Offset | 1mV |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.7μA |
| Programmable Power | NO |
| Wideband | NO |
| Input Voltage Noise Density | 15nV/sqrt Hz |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
OP292GSZ-REEL Overview
Packaged in a 8-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. General Purpose-type instrumentation amplifiers are used in this application. The op amp is delivered to you in a Tape & Reel (TR) case. It is estimated that there will be 8 terminations in the next few months. A total of 8 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. In total, the buffer amplifier consists of 8 pins. As far as the input offset voltage is concerned, linear amplifier rates at 2mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. It is important to note that this linear amplifier works well at a temperature of -40°C~125°C when it comes to operating temperatureUsing a supply current of 2.8mA , this buffer op amp will be able to operate. It is recommended to keep the voltage gain at 106.02dB at all times. There are 2 channels on the operational amplifiers. The operating supply voltage of the buffer op amp is rated at 28V. The instrumentation amplifier is packed in the form of TAPE AND REEL. There is an 1.4mA quiescent current in linear amplifier.
OP292GSZ-REEL Features
8 Pins
supply voltage of 5V
106.02dB voltage gain
OP292GSZ-REEL Applications
There are a lot of Analog Devices Inc. OP292GSZ-REEL Instrumentational OP Amps applications.
- Portable docking station
- Subtraction operation circuits
- Strain gauges
- Hand-held batteries
- Television
- Vehicle electronics
- Industrial control system
- Gaming industry
- Large motor controllers
- single/dual op amp sum and difference circuits
