OP293ESZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | OP293 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 18V |
| Number of Elements | 2 |
| Operating Supply Current | 60μA |
| Nominal Supply Current | 30μA |
| Output Current | 25mA |
| Max Supply Current | 29μA |
| Quiescent Current | 30μA |
| Slew Rate | 0.015V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 116 dB |
| Current - Input Bias | 15nA |
| Max Input Voltage | 13.5V |
| Voltage - Supply, Single/Dual (±) | 1.7V~36V ±0.85V~18V |
| Output Current per Channel | 25mA |
| Supply Type | Dual, Single |
| Input Offset Voltage (Vos) | 200μV |
| Bandwidth | 35 kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 35 kHz |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.015μA |
| Power Supply Rejection Ratio (PSRR) | 120dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 100μV |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.015μA |
| Dual Supply Voltage | 15V |
| Input Voltage Noise Density | 65nV/sqrt Hz |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
OP293ESZ Overview
In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. Buffer amps of this type are called General Purpose-types. The op amp is delivered to you in a Tube case. There have been a total of 8 terminations over the past year. The total number of pins on linear amplifier is 8. I would like to remind you that this buffer op amp should be powered by an 15V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. There are 8 pins on this chip. Regarding input offset voltage, op amp rates 200μV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~125°C . In order for this instrumentation amplifier to operate, the supply current needs to be between 60μA and 10 . Voltage gain should remain at 106.02dB. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. A total of 2 elements are present in this linear amplifier. The operating supply voltage of instrumentation amplifier is rated 18V voltage. 30μA quiescent currents are flowing through buffer op amp.
OP293ESZ Features
8 Pins
supply voltage of 15V
106.02dB voltage gain
Output Type: Rail-to-Rail
OP293ESZ Applications
There are a lot of Analog Devices Inc. OP293ESZ Instrumentational OP Amps applications.
- single/dual op amp sum and difference circuits
- Television
- Hand-held batteries
- Portable docking station
- Switching amplifier
- Vehicle electronics
- Signal amplification
- Oscilloscopes
- Semiconductor detectors
- MP3
