OP293ESZ-REEL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | OP293 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 28V |
| Number of Channels | 2 |
| Operating Supply Current | 60μA |
| Nominal Supply Current | 29μA |
| Quiescent Current | 30μA |
| Slew Rate | 0.015V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 116 dB |
| Current - Input Bias | 15nA |
| Voltage - Supply, Single/Dual (±) | 1.7V~36V ±0.85V~18V |
| Output Current per Channel | 25mA |
| Supply Type | Dual, Single |
| Input Offset Voltage (Vos) | 200μV |
| Gain Bandwidth Product | 35kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 35 kHz |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.015μA |
| Power Supply Rejection Ratio (PSRR) | 120dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 100μV |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.015μA |
| Dual Supply Voltage | 15V |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
OP293ESZ-REEL Overview
There is a 8-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. The instrumentation amplifier in this picture is of the General Purpose-type. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. It is estimated that there will be 8 terminations in the next few months. Buffer amplifier has a total of 8 pins on it. This linear amplifier should be powered by an 15V battery. It should be noted that this op amp is a type of Operational Amplifier device. There are 8 pins on this chip. With regards to the offset voltage of the input, buffer amplifier is rated at 200μV. This electrical part should be mounted using type Surface Mount. With regard to operating temperature, this op amp functions well at -40°C~125°C. It is possible to operate this buffer amplifier from a supply current of 60μA . The voltage gain should stay at 106.02dB. Op amp ic has 2 channels. On the output type, there are Rail-to-Rail different types of op amps. The operating supply voltage of the buffer op amp is rated at 28V. This linear amplifier pack is based on the TAPE AND REEL axis. There is an 30μA quiescent current running through op amp ic.
OP293ESZ-REEL Features
8 Pins
supply voltage of 15V
106.02dB voltage gain
Output Type: Rail-to-Rail
OP293ESZ-REEL Applications
There are a lot of Analog Devices Inc. OP293ESZ-REEL Instrumentational OP Amps applications.
- High/low-pass filter circuit
- Video conversion and routing
- single/dual op amp sum and difference circuits
- Automatic control
- PDA
- Thermocouples
- High speed sample
- Radiation thermometry transducers
- Signal amplification
- Signal transformation
