OP293ESZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | OP293 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Elements | 2 |
| Power Supplies | 5/+-15V |
| Operating Supply Current | 60μA |
| Quiescent Current | 30μA |
| Slew Rate | 0.015V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 116 dB |
| Current - Input Bias | 15nA |
| Voltage - Supply, Single/Dual (±) | 1.7V~36V ±0.85V~18V |
| Output Current per Channel | 25mA |
| Input Offset Voltage (Vos) | 200μV |
| Gain Bandwidth Product | 35kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 35 kHz |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.015μA |
| Power Supply Rejection Ratio (PSRR) | 120dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 100μV |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.015μA |
| Input Voltage Noise Density | 65nV/sqrt Hz |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
OP293ESZ-REEL7 Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case. This is a General Purpose type op amp. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. The number of terminations approaches 8. It consists of a total of 8 pins in total. Please take in mind that this instrumentation amplifier should be run at 15V. This particular linear amplifier is a type of Operational Amplifier device, to be precise. An 8-pin op amp ic is included in the package. Op amp rates 200μV as input offset voltage. For this electrical component, Surface Mount is the recommended mounting type. It is important to note that this linear amplifier works well at a temperature of -40°C~125°C when it comes to operating temperatureYou can run this op amp ic on 60μA . There should be no change in the voltage gain at 106.02dB. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. A voltage rating of 2 is indicated for the op amp's operating supply voltage. It is used TAPE AND REEL to pack the op amps. Linear amplifier has a quiescent current of 30μA.
OP293ESZ-REEL7 Features
8 Pins
supply voltage of 15V
106.02dB voltage gain
Output Type: Rail-to-Rail
OP293ESZ-REEL7 Applications
There are a lot of Analog Devices Inc. OP293ESZ-REEL7 Instrumentational OP Amps applications.
- Polarized electrodes
- earphone
- Television
- Logarithmic operation circuits
- Automation control systems
- Mobile phone
- Differentiator circuits
- Test and measurement instruments
- Industrial control system
- High input resistance broadband
