OP295GP

2 Channels 25mA per Channel 7nA 110 dB Instrumentational OP Amps 0.03μA 28V 3V~36V ±1.5V~18V OP295 8 Pins 8-DIP (0.300, 7.62mm)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-OP295GP
Package: 8-DIP (0.300, 7.62mm)
Datasheet: PDF
Stock: 578
Description: 2 Channels 25mA per Channel 7nA 110 dB Instrumentational OP Amps 0.03μA 28V 3V~36V ±1.5V~18V OP295 8 Pins 8-DIP (0.300, 7.62mm)(Kg)

Inquiry Now

Details

Tags

Parameters
Mounting Type	Through Hole
Package / Case	8-DIP (0.300, 7.62mm)
Surface Mount	NO
Number of Pins	8
Operating Temperature	-40°C~125°C
Packaging	Tube
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Subcategory	Operational Amplifier
Technology	BICMOS
Terminal Position	DUAL
Number of Functions	2
Supply Voltage	15V
Base Part Number	OP295
Pin Count	8
Output Type	Rail-to-Rail
Operating Supply Voltage	28V
Number of Channels	2
Operating Supply Current	350μA
Nominal Supply Current	300μA
Max Supply Current	300μA
Quiescent Current	150μA
Slew Rate	0.03V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	110 dB
Current - Input Bias	7nA
Voltage - Supply, Single/Dual (±)	3V~36V ±1.5V~18V
Output Current per Channel	25mA
Input Offset Voltage (Vos)	500μV
Gain Bandwidth Product	85kHz
Neg Supply Voltage-Nom (Vsup)	-15V
Unity Gain BW-Nom	85 kHz
Voltage Gain	140dB
Average Bias Current-Max (IIB)	0.03μA
Power Supply Rejection Ratio (PSRR)	110dB
Low-Offset	YES
Frequency Compensation	YES
Voltage - Input Offset	300μV
Micropower	YES
Dual Supply Voltage	15V
Height	3.43mm
Length	9.27mm
Width	7.24mm
Radiation Hardening	No
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead

OP295GP Overview

The linear amplifier is packaged in a 8-DIP (0.300, 7.62mm) case. An op amp ic of the General Purpose type. Upon delivery, op amp ic is packaged in a Tube case. There have been a total of 8 terminations over the past year. Buffer amplifier has a total of 8 pins on it. It is important to remember that this op amp should be operated at a voltage of 15V volts. To be specific, this instrumentation amplifier is a type of Operational Amplifier. The op amp ic has an array of 8 pins on it. In terms of input offset voltage, operational amplifier rates 500μV. Through Hole is the recommended mounting type of operational amplifiers. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. An 350μA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain. There are 2 channels on the operational amplifiers. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. The operating supply voltage of the buffer op amp is rated at 28V. Buffer amplifier has a quiescent current of 150μA.