OP295GSZ
| Parameters | |
|---|---|
| Voltage - Supply, Single/Dual (±) | 3V~36V ±1.5V~18V |
| Output Current per Channel | 25mA |
| Input Offset Voltage (Vos) | 500μV |
| Bandwidth | 1 kHz |
| Gain Bandwidth Product | 85kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 85 kHz |
| Voltage Gain | 140dB |
| Average Bias Current-Max (IIB) | 0.03μA |
| Power Supply Rejection Ratio (PSRR) | 110dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 300μV |
| Micropower | YES |
| Dual Supply Voltage | 15V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | OP295 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 28V |
| Number of Channels | 2 |
| Operating Supply Current | 350μA |
| Nominal Supply Current | 300μA |
| Max Supply Current | 150μA |
| Quiescent Current | 150μA |
| Slew Rate | 0.03V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 110 dB |
| Current - Input Bias | 7nA |
OP295GSZ Overview
A 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. General Purpose-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tube case. There is a growing number of terminations approaching the number of 8. It consists of a total of 8 pins in total. It is important to remember that this op amp should be operated at a voltage of 15V volts. To be specific, this instrumentation amplifier is a type of Operational Amplifier. There are 8 pins on this chip. With regard to input offset voltage, instrumentation amplifier is rated at 500μV. This electronic part is recommended for mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. This op amp can operate from a supply current at 350μA. It is recommended to keep the voltage gain at 140dB at all times. 2 channels are available on the instrumentation amplifier. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. The operating supply voltage of the buffer op amp is rated at 28V. Linear amplifier has a quiescent current of 150μA.
OP295GSZ Features
8 Pins
supply voltage of 15V
140dB voltage gain
Output Type: Rail-to-Rail
OP295GSZ Applications
There are a lot of Analog Devices Inc. OP295GSZ Instrumentational OP Amps applications.
- Switching amplifier
- Professional videography
- Communication device
- Semiconductor detectors
- Addition operation circuits
- pH (acidity)
- Video computer boards
- single/dual op amp sum and difference circuits
- Proportional operation circuits
- Broadcasting
