OP295GSZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | OP295 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 28V |
| Number of Channels | 2 |
| Operating Supply Current | 350μA |
| Nominal Supply Current | 300μA |
| Quiescent Current | 150μA |
| Slew Rate | 0.03V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 110 dB |
| Current - Input Bias | 7nA |
| Voltage - Supply, Single/Dual (±) | 3V~36V ±1.5V~18V |
| Output Current per Channel | 25mA |
| Input Offset Voltage (Vos) | 500μV |
| Bandwidth | 85 kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 85 kHz |
| Voltage Gain | 140dB |
| Average Bias Current-Max (IIB) | 0.03μA |
| Power Supply Rejection Ratio (PSRR) | 110dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 300μV |
| Micropower | YES |
| Dual Supply Voltage | 15V |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
OP295GSZ-REEL7 Overview
In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. An op amp of this type is a General Purpose-type. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. There is a growing number of terminations approaching the number of 8. In total, there are 8 pins on this op amp ic. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. A total of 8 pins are present on the instrumentation amplifier. Op amp ic rates 500μV for input offset voltage. This electronic part is recommended for mounting type Surface Mount. With regard to operating temperature, this op amp functions well at -40°C~125°C. As long as the supply current of the chip does not exceed 350μA, this op amp ic can operate. Maintain 140dB as the voltage gain. Op amp ic has 2 channels. On the output type, there are Rail-to-Rail different types of op amps. The operating supply voltage of instrumentation amplifier is rated 28V voltage. A TAPE AND REEL-shaped amplifier is used to pack the buffer amps. As a result, linear amplifier's quiescent current is 150μA.
OP295GSZ-REEL7 Features
8 Pins
supply voltage of 15V
140dB voltage gain
Output Type: Rail-to-Rail
OP295GSZ-REEL7 Applications
There are a lot of Analog Devices Inc. OP295GSZ-REEL7 Instrumentational OP Amps applications.
- Industrial control system
- Communication
- Active probe
- Large motor controllers
- Information processing
- Commercial audio systems
- Medical imaging
- Navigation
- Cinema or auditorium audio system
- Video amplifiers
