OP296GSZ-REEL7
| Parameters | |
|---|---|
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | OP296 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Channels | 2 |
| Operating Supply Current | 120μA |
| Quiescent Current | 60μA |
| Supply Current-Max | 0.16mA |
| Slew Rate | 0.3V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 10nA |
| Voltage - Supply, Single/Dual (±) | 3V~12V ±1.5V~6V |
| Output Current per Channel | 4mA |
| Input Offset Voltage (Vos) | 300μV |
| Bandwidth | 450 kHz |
| Unity Gain BW-Nom | 350 kHz |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.05μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 15V |
| Voltage - Input Offset | 35μV |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.05μA |
| Input Voltage Noise Density | 26nV/sqrt Hz |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
OP296GSZ-REEL7 Overview
A 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. A General Purpose-type buffer amplifier is shown here. Linear amplifier is delivered in a Tape & Reel (TR) case. The number of terminations approaches 8. The total number of pins on linear amplifier is 8. Please take in mind that op amp should be run at 5V. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. The buffer op amp includes 8 pins. There is an input offset voltage of 300μV for this buffer op amp. For this electronic part, it is recommended that you mount it with type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . This op amp can operate from a supply current at 120μA. 106.02dB should remain the voltage gain. As far as the device is concerned, buffer amplifier has 2 channels. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. An buffer amplifier is packed in a TAPE AND REEL-shape according to the design. 60μA quiescent currents are flowing through buffer op amp.
OP296GSZ-REEL7 Features
8 Pins
supply voltage of 5V
106.02dB voltage gain
Output Type: Rail-to-Rail
OP296GSZ-REEL7 Applications
There are a lot of Analog Devices Inc. OP296GSZ-REEL7 Instrumentational OP Amps applications.
- Wireless base stations
- Signal amplification
- Computer workstations
- High-frequency data acquisition systems
- Power transmission
- Differentiator circuits
- Radiation thermometry transducers
- High speed sample
- Medical imaging
- Polarized electrodes
