OP297GPZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Base Part Number | OP297 |
| Pin Count | 8 |
| Operating Supply Voltage | 15V |
| Number of Channels | 2 |
| Operating Supply Current | 1.25mA |
| Max Supply Current | 1.25mA |
| Quiescent Current | 625μA |
| Slew Rate | 0.15V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 135 dB |
| Current - Input Bias | 50pA |
| Voltage - Supply, Single/Dual (±) | 4V~40V ±2V~20V |
| Input Offset Voltage (Vos) | 50μV |
| Bandwidth | 500 kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 500 kHz |
| Voltage Gain | 130.1dB |
| Average Bias Current-Max (IIB) | 0.00075μA |
| Power Supply Rejection Ratio (PSRR) | 125dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 80μV |
| Low-Bias | YES |
| Dual Supply Voltage | 9V |
| Input Capacitance | 3pF |
| Input Voltage Noise Density | 20nV/sqrt Hz |
| Height | 3.3mm |
| Length | 9.27mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
OP297GPZ Overview
In order to protect the op amps, a 8-DIP (0.300, 7.62mm) case is used. The instrumentation amplifier in this picture is of the General Purpose-type. Linear amplifier is delivered in a Tube case. It is estimated that there will be at least 8 terminations this year. Linear amplifier has a total of 8 pins. This linear amplifier should be powered by an 15V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. Linear amplifier includes 8 pins. With regard to input offset voltage, instrumentation amplifier is rated at 50μV. This electronic part is recommended for mounting type Through Hole. With regard to operating temperature, this op amp functions well at -40°C~85°C. You can run this op amp ic on 1.25mA . 130.1dB should remain the voltage gain. 2 channels are available on the instrumentation amplifier. The operating supply voltage of the buffer op amp is rated at 15V. Currently, linear amplifier is operating with a quiescent current of 625μA.
OP297GPZ Features
8 Pins
supply voltage of 15V
130.1dB voltage gain
OP297GPZ Applications
There are a lot of Analog Devices Inc. OP297GPZ Instrumentational OP Amps applications.
- Precision measurement
- Measurements of Wheatstone bridge
- Hand-held batteries
- Television
- Digital cameras
- Micro signal measurement
- Comparator
- Addition operation circuits
- Power generator
- Logarithmic operation circuits
