OP297GS-REEL
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | OP297 |
| Pin Count | 8 |
| Power Supplies | +-15V |
| Number of Channels | 2 |
| Operating Supply Current | 1.25mA |
| Quiescent Current | 625μA |
| Supply Current-Max | 1.5mA |
| Slew Rate | 0.15V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 135 dB |
| Current - Input Bias | 50pA |
| Voltage - Supply, Single/Dual (±) | 4V~40V ±2V~20V |
| Input Offset Voltage (Vos) | 50μV |
| Gain Bandwidth Product | 500kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 500 kHz |
| Voltage Gain | 130.1dB |
| Average Bias Current-Max (IIB) | 0.00075μA |
| Power Supply Rejection Ratio (PSRR) | 125dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 80μV |
| Low-Bias | YES |
| Input Capacitance | 3pF |
| Input Voltage Noise Density | 20nV/sqrt Hz |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
OP297GS-REEL Overview
Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. This is a General Purpose type op amp. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. We are approaching the 8h termination of the year. The total number of pins on linear amplifier is 8. It is important to remember that this op amp should be operated at a voltage of 15V volts. Instrumentation amplifier is a part of Operational Amplifier. 8 pins are available on the instrumentation amplifier. Regarding input offset voltage, op amp rates 50μV. This electronic part is best mounted with type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . A supply current of 1.25mA can be used to operate this linear amplifier. Maintain 130.1dB as the voltage gain. On the buffer amps, there are 2 channels that can be used. A TAPE AND REEL-shaped amplifier is used to pack the buffer amps. There is an 625μA quiescent current running through op amp ic.
OP297GS-REEL Features
8 Pins
supply voltage of 15V
130.1dB voltage gain
OP297GS-REEL Applications
There are a lot of Analog Devices Inc. OP297GS-REEL Instrumentational OP Amps applications.
- Signal filtering
- Biopotential
- Mobile phone
- Commercial audio systems
- Displayers for aircraft and air transportation control systems
- E-book readers
- PDA
- Proportional operation circuits
- High gain DC amplifier
- Digital cameras
