OP37EN8#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 6 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -25°C~85°C |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | OP37 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Circuits | 1 |
| Operating Supply Current | 5.67mA |
| Power Dissipation | 500mW |
| Quiescent Current | 5.67mA |
| Slew Rate | 17V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 114 dB |
| Current - Input Bias | 10nA |
| Voltage - Supply, Single/Dual (±) | ±4V~18V |
| Input Offset Voltage (Vos) | 10μV |
| Gain Bandwidth Product | 63MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 40000 kHz |
| Voltage Gain | 125.11dB |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Low-Offset | YES |
| Frequency Compensation | YES AVCL>=5 |
| Supply Voltage Limit-Max | 22V |
| Bias Current-Max (IIB) @25C | 0.04μA |
| Neg Supply Voltage-Max (Vsup) | -22V |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OP37EN8#PBF Overview
In order to protect the op amps, a 8-DIP (0.300, 7.62mm) case is used. An op amp ic of the General Purpose type. There is a Tube case that is delivered with the instrumentation amplifiers. There is a growing number of terminations approaching the number of 8. Linear amplifier has a total of 8 pins. It would be helpful if you could remember that this op amp ic should be powered by an 15V battery. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. There are 8 pins on this chip. The input offset voltage is 10μV. Through Hole is the recommended mounting type for this linear amplifier. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -25°C~85°C . A supply current of 5.67mA can be used to operate this linear amplifier. Op amp is a member of the 125.11dB's 125.11dB family. This op amp contains 1 circuits. The quiescent current is 5.67mA.
OP37EN8#PBF Features
8 Pins
supply voltage of 15V
125.11dB voltage gain
OP37EN8#PBF Applications
There are a lot of Linear Technology/Analog Devices OP37EN8#PBF Instrumentational OP Amps applications.
- Strain gauges
- Commercial audio systems
- Image computer boards
- Switching amplifier
- Semiconductor detectors
- High speed sample
- Power transmission
- Fast A/D and D/A converters
- Gaming industry
- Measurements of Wheatstone bridge
