OP400FY
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Through Hole |
| Package / Case | 14-CDIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 14 |
| Operating Temperature | -25°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Base Part Number | OP400 |
| Pin Count | 14 |
| Power Supplies | +-15V |
| Number of Channels | 4 |
| Operating Supply Current | 2.9mA |
| Nominal Supply Current | 600μA |
| Quiescent Current | 725μA |
| Slew Rate | 0.15V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 135 dB |
| Current - Input Bias | 750pA |
| Max Input Voltage | 13V |
| Voltage - Supply, Single/Dual (±) | ±3V~18V |
| Supply Type | Dual |
| Input Offset Voltage (Vos) | 220μV |
| Bandwidth | 500 kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 500 kHz |
| Voltage Gain | 136.9dB |
| Average Bias Current-Max (IIB) | 0.01μA |
| Power Supply Rejection Ratio (PSRR) | 134dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 20V |
| Voltage - Input Offset | 60μV |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.006μA |
| Dual Supply Voltage | 18V |
| Input Capacitance | 3.2pF |
| Neg Supply Voltage-Max (Vsup) | -20V |
| Input Voltage Noise Density | 22nV/sqrt Hz |
| Height Seated (Max) | 5.08mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
OP400FY Overview
A 14-CDIP (0.300, 7.62mm) case is used to package the op amp. The instrumentation amplifier in this picture is of the General Purpose-type. Upon delivery, op amp ic is packaged in a Tube case. During the past two weeks, there have been close to 14 terminations. Buffer amplifier has a total of 14 pins. It is important to remember that this op amp should be operated at a voltage of 15V volts. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. There are 14 pins on this chip. With regards to the offset voltage of the input, buffer amplifier is rated at 220μV. The mounting type that is recommended for this electrical part is Through Hole. The buffer amplifier functions well at -25°C~85°C as far as operating temperature is concerned. A supply current of 2.9mA can be used to operate this linear amplifier. You should keep the voltage gain at 136.9dB for the time being. Op amp ic has 4 channels. The quiescent current is 725μA.
OP400FY Features
14 Pins
supply voltage of 15V
136.9dB voltage gain
OP400FY Applications
There are a lot of Analog Devices Inc. OP400FY Instrumentational OP Amps applications.
- Fast A/D and D/A converters
- Addition operation circuits
- Video computer boards
- Commercial audio systems
- Communication
- Wireless base stations
- Video conversion and routing
- Car stereo
- Medical imaging
- Semiconductor detectors
