OP400GS
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | OP400 |
| Pin Count | 16 |
| Operating Supply Voltage | 15V |
| Number of Channels | 4 |
| Operating Supply Current | 2.9mA |
| Nominal Supply Current | 2.9mA |
| Output Current | 5mA |
| Quiescent Current | 725μA |
| Slew Rate | 0.15V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 135 dB |
| Current - Input Bias | 750pA |
| Voltage - Supply, Single/Dual (±) | ±3V~18V |
| Output Current per Channel | 5mA |
| Input Offset Voltage (Vos) | 220μV |
| Gain Bandwidth Product | 500kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 500 kHz |
| Voltage Gain | 136.9dB |
| Average Bias Current-Max (IIB) | 0.012μA |
| Power Supply Rejection Ratio (PSRR) | 134dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 20V |
| Voltage - Input Offset | 80μV |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.007μA |
| Dual Supply Voltage | 18V |
| Input Capacitance | 3.2pF |
| Input Voltage Noise Density | 22nV/sqrt Hz |
| Height Seated (Max) | 2.65mm |
| Length | 10.3mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
OP400GS Overview
It is packaged in an 16-SOIC (0.295, 7.50mm Width)-case that protects the operational amplifiers from damage. Op amps are General Purpose types of amplifier on the chip. There is a Tube case that is delivered with the instrumentation amplifiers. It is estimated that there will be 16 terminations in the next few months. The total number of pins on linear amplifier is 16. It is important to remember that this op amp should be operated at a voltage of 15V volts. This particular linear amplifier is a type of Operational Amplifier device, to be precise. A total of 16 pins are present on the instrumentation amplifier. There is an input offset voltage of 220μV for this buffer op amp. Surface Mount is the recommended mounting type for this linear amplifier. According to the manufacturer, this buffer op amp works well at 0°C~70°C , which is a good operating temperature. Using a supply current of 2.9mA , this buffer op amp will be able to operate. 136.9dB should be the voltage gain. There are 4 channels on the operational amplifiers. The operating supply voltage of the buffer op amp is rated at 15V. As a result, linear amplifier's quiescent current is 725μA.
OP400GS Features
16 Pins
supply voltage of 15V
136.9dB voltage gain
OP400GS Applications
There are a lot of Analog Devices Inc. OP400GS Instrumentational OP Amps applications.
- Micro signal measurement
- Cinema or auditorium audio system
- Television broadcasting equipment
- Logarithmic operation circuits
- single/dual op amp sum and difference circuits
- Test and measurement instruments
- Wireless base stations
- Weighing systems
- Video amplifiers
- Communication
