Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 3 months ago) |
Contact Plating |
Tin |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.295, 7.50mm Width) |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
0°C~70°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Subcategory |
Operational Amplifier |
Packing Method |
TAPE AND REEL |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
15V |
Terminal Pitch |
1.27mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
OP400 |
Pin Count |
16 |
Power Supplies |
+-15V |
Number of Channels |
4 |
Operating Supply Current |
2.9mA |
Nominal Supply Current |
2.9mA |
Quiescent Current |
725μA |
Slew Rate |
0.15V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
135 dB |
Current - Input Bias |
750pA |
Voltage - Supply, Single/Dual (±) |
±3V~18V |
Input Offset Voltage (Vos) |
220μV |
Gain Bandwidth Product |
500kHz |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Unity Gain BW-Nom |
500 kHz |
Voltage Gain |
136.9dB |
Average Bias Current-Max (IIB) |
0.012μA |
Power Supply Rejection Ratio (PSRR) |
134dB |
Low-Offset |
YES |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
20V |
Voltage - Input Offset |
80μV |
Micropower |
YES |
Bias Current-Max (IIB) @25C |
0.007μA |
Dual Supply Voltage |
18V |
Input Capacitance |
3.2pF |
Neg Supply Voltage-Max (Vsup) |
-20V |
Input Voltage Noise Density |
22nV/sqrt Hz |
Height Seated (Max) |
2.65mm |
Length |
10.3mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
OP400GSZ-REEL Overview
The linear amplifier is packaged in a 16-SOIC (0.295, 7.50mm Width) case which makes it easy for the consumer to handle. General Purpose-type instrumentation amplifiers are used in this application. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. We are approaching the 16h termination of the year. In total, there are 16 pins on this op amp ic. This linear amplifier should be powered by an 15V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. In total, the buffer amplifier consists of 16 pins. Regarding input offset voltage, op amp rates 220μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. The buffer amplifier functions well at 0°C~70°C as far as operating temperature is concerned. This op amp can operate from a supply current at 2.9mA. You should keep the voltage gain at 136.9dB for the time being. Instrumentation amplifier has 4 channels on it. As a result of this, the buffer amplifier is packed in TAPE AND REEL. Buffer amplifier has a quiescent current of 725μA.
OP400GSZ-REEL Features
16 Pins
supply voltage of 15V
136.9dB voltage gain
OP400GSZ-REEL Applications
There are a lot of Analog Devices Inc. OP400GSZ-REEL Instrumentational OP Amps applications.
- Communication device
- High/low-pass filter circuit
- Video data acquisition
- Test and measurement instruments
- Weighing systems
- Automatic control
- RF cable systems
- Multiplication circuits
- Test equipment
- Car stereo