OP400HPZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Contact Plating | Tin |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Base Part Number | OP400 |
| Pin Count | 14 |
| Power Supplies | +-15V |
| Number of Channels | 4 |
| Operating Supply Current | 2.9mA |
| Quiescent Current | 725μA |
| Supply Current-Max | 3.1mA |
| Slew Rate | 0.15V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 135 dB |
| Current - Input Bias | 750pA |
| Voltage - Supply, Single/Dual (±) | ±3V~18V |
| Input Offset Voltage (Vos) | 220μV |
| Bandwidth | 500 kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 500 kHz |
| Voltage Gain | 136.9dB |
| Average Bias Current-Max (IIB) | 0.02μA |
| Power Supply Rejection Ratio (PSRR) | 134dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 20V |
| Voltage - Input Offset | 80μV |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.007μA |
| Dual Supply Voltage | 9V |
| Input Capacitance | 3.2pF |
| Neg Supply Voltage-Max (Vsup) | -20V |
| Input Voltage Noise Density | 22nV/sqrt Hz |
| Height | 3.3mm |
| Length | 19.05mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
OP400HPZ Overview
There is a 14-DIP (0.300, 7.62mm) case in which the instrumentation amplifier is packaged. The instrumentation amplifier in this picture is of the General Purpose-type. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. We are approaching the 14h termination of the year. Buffer amplifier has a total of 14 pins. It is important to remember that this op amp should be operated at a voltage of 15V volts. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. There are 14 pins on this chip. The input offset voltage is 220μV. Through Hole is the recommended mounting type of operational amplifiers. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperatureA supply current of 2.9mA can be used to operate this linear amplifier. Op amp is a member of the 136.9dB's 136.9dB family. On the buffer amps, there are 4 channels that can be used. As a result, linear amplifier's quiescent current is 725μA.
OP400HPZ Features
14 Pins
supply voltage of 15V
136.9dB voltage gain
OP400HPZ Applications
There are a lot of Analog Devices Inc. OP400HPZ Instrumentational OP Amps applications.
- Inverse/same-phase proportional circuit
- Multimedia playback equipment
- Weak signal detection
- Radiation thermometry transducers
- E-book readers
- High-frequency data acquisition systems
- Biopotential
- Non-polarized electrodes
- Mobile phone
- Wireless base stations
