OP4177ARU
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | OP4177 |
| Pin Count | 14 |
| Power Supplies | +-5/+-15V |
| Number of Channels | 4 |
| Operating Supply Current | 2mA |
| Nominal Supply Current | 400μA |
| Output Current | 10mA |
| Quiescent Current | 500μA |
| Slew Rate | 0.7V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 125 dB |
| Current - Input Bias | 500pA |
| Max Input Voltage | 13.5V |
| Voltage - Supply, Single/Dual (±) | 5V~36V ±2.5V~18V |
| Output Current per Channel | 10mA |
| Supply Type | Dual |
| Input Offset Voltage (Vos) | 75μV |
| Gain Bandwidth Product | 1.3MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 1300 kHz |
| Voltage Gain | 126.02dB |
| Average Bias Current-Max (IIB) | 0.002μA |
| Power Supply Rejection Ratio (PSRR) | 125dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 15μV |
| Low-Bias | NO |
| Micropower | YES |
| Programmable Power | NO |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Wideband | NO |
| Height Seated (Max) | 1.2mm |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
OP4177ARU Overview
There is a 14-TSSOP (0.173, 4.40mm Width) case package that contains the instrumentation amplifiers. Op amps are General Purpose types of amplifier on the chip. Linear amplifier is delivered in a Tube case. A total of 14 terminations have been reported in the past few weeks. In this case, there are 14 pins on the board. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. In total, the buffer amplifier consists of 14 pins. In terms of the input offset voltage, instrumentation amplifier rates at 75μV. Surface Mount is the recommended mounting type for this linear amplifier. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. A supply current of 2mA can be used to operate this linear amplifier. It is recommended to keep the voltage gain at 126.02dB at all times. As far as the device is concerned, buffer amplifier has 4 channels. There is an 500μA quiescent current in linear amplifier.
OP4177ARU Features
14 Pins
supply voltage of 5V
126.02dB voltage gain
OP4177ARU Applications
There are a lot of Analog Devices Inc. OP4177ARU Instrumentational OP Amps applications.
- Portable docking station
- MP3
- Subtraction operation circuits
- Information processing
- Logarithmic operation circuits
- Band-stop filter
- High/low-pass filter circuit
- Cinema or auditorium audio system
- Portable electronic products powered by batteries
- Comparator
