OP4177ARU-REEL
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | OP4177 |
| Pin Count | 14 |
| Power Supplies | +-5/+-15V |
| Number of Channels | 4 |
| Operating Supply Current | 2mA |
| Nominal Supply Current | 400μA |
| Output Current | 1mA |
| Quiescent Current | 500μA |
| Slew Rate | 0.7V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 125 dB |
| Current - Input Bias | 500pA |
| Max Input Voltage | 13.5V |
| Voltage - Supply, Single/Dual (±) | 5V~36V ±2.5V~18V |
| Output Current per Channel | 10mA |
| Supply Type | Dual |
| Input Offset Voltage (Vos) | 75μV |
| Gain Bandwidth Product | 1.3MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 1300 kHz |
| Voltage Gain | 126.02dB |
| Average Bias Current-Max (IIB) | 0.002μA |
| Power Supply Rejection Ratio (PSRR) | 125dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 15μV |
| Low-Bias | NO |
| Micropower | YES |
| Programmable Power | NO |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Wideband | NO |
| Height Seated (Max) | 1.2mm |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
OP4177ARU-REEL Overview
Op amp is packaged in 14-TSSOP (0.173, 4.40mm Width) case. Buffer amps of this type are called General Purpose-types. A Tape & Reel (TR) case is used to deliver the buffer op amp. There is a growing number of terminations approaching the number of 14. The total number of pins on linear amplifier is 14. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. An 14-pin op amp ic is included in the package. With regard to input offset voltage, instrumentation amplifier is rated at 75μV. This electronic part is best mounted with type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . Operational amplifier can operate supply current at 2mA. It is recommended to keep the voltage gain at 126.02dB at all times. As far as the device is concerned, buffer amplifier has 4 channels. For packing the buffer amplifier, the TAPE AND REEL-axis is adopted. The current is quiescent at 500μA.
OP4177ARU-REEL Features
14 Pins
supply voltage of 5V
126.02dB voltage gain
OP4177ARU-REEL Applications
There are a lot of Analog Devices Inc. OP4177ARU-REEL Instrumentational OP Amps applications.
- High-frequency data acquisition systems
- Video amplifiers
- Industrial control system
- RF cable systems
- Home audio systems
- Semiconductor detectors
- Professional videography
- Automation control systems
- Active probe
- Subtraction operation circuits
