banner_page

OP42AZ/883C

1 Channels 80pA 92 dB Instrumentational OP Amps 0.02μA 15V ±8V~20V OP42 8 Pins 8-CDIP (0.300, 7.62mm)


  • Manufacturer: Analog Devices Inc.
  • Nocochips NO: 84-OP42AZ/883C
  • Package: 8-CDIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 478
  • Description: 1 Channels 80pA 92 dB Instrumentational OP Amps 0.02μA 15V ±8V~20V OP42 8 Pins 8-CDIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status PRODUCTION (Last Updated: 1 month ago)
Contact Plating Lead, Tin
Mounting Type Through Hole
Package / Case 8-CDIP (0.300, 7.62mm)
Surface Mount NO
Number of Pins 8
Operating Temperature -55°C~125°C
Packaging Tube
Series Military, MIL-STD-883
JESD-609 Code e0
Pbfree Code no
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Tin/Lead (Sn63Pb37)
Subcategory Operational Amplifier
Technology BIPOLAR
Number of Functions 1
Supply Voltage 15V
Terminal Pitch 2.54mm
Base Part Number OP42
Pin Count 8
Operating Supply Voltage 15V
Number of Channels 1
Operating Supply Current 6.5mA
Nominal Supply Current 6mA
Quiescent Current 5.1mA
Slew Rate 52V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type J-FET
Common Mode Rejection Ratio 92 dB
Current - Input Bias 80pA
Voltage - Supply, Single/Dual (±) ±8V~20V
Supply Type Dual
Input Offset Voltage (Vos) 1.2mV
Gain Bandwidth Product 10MHz
Neg Supply Voltage-Nom (Vsup) -15V
Unity Gain BW-Nom 10000 kHz
Voltage Gain 119.08dB
Average Bias Current-Max (IIB) 0.02μA
Power Supply Rejection Ratio (PSRR) 98dB
Low-Offset NO
Frequency Compensation YES
Supply Voltage Limit-Max 20V
Voltage - Input Offset 300μV
Settling Time 800 ns
Current - Output / Channel 33mA
Low-Bias YES
Bias Current-Max (IIB) @25C 0.0002μA
Dual Supply Voltage 15V
Input Capacitance 6pF
Input Offset Current-Max (IIO) 0.00004μA
Input Voltage Noise Density 38nV/sqrt Hz
Radiation Hardening No
RoHS Status Non-RoHS Compliant
Lead Free Contains Lead

OP42AZ/883C Overview


A 8-CDIP (0.300, 7.62mm) case is used to package the op amp. There are two types of operational amplifiers in this circuit. The op amp is delivered to you in a Tube case. There have been a total of 8 terminations over the past year. It consists of a total of 8 pins in total. It is important to remember that this op amp should be operated at a voltage of 15V volts. Instrumentation amplifier is a part of Operational Amplifier. An 8-pin op amp ic is included in the package. As far as the input offset voltage is concerned, linear amplifier rates at 1.2mV. This electronic part is best mounted with type Through Hole. The buffer amplifier functions well at -55°C~125°C as far as operating temperature is concerned. The buffer amplifier is capable of operating from a supply current of 6.5mA . You should keep the voltage gain at 119.08dB for the time being. Op amp ic has 1 channels. The operating supply voltage of instrumentation amplifier is rated 15V voltage. This buffer amplifier is assigned within the Military, MIL-STD-883 series by its manufacturer. Linear amplifier has a quiescent current of 5.1mA.

OP42AZ/883C Features


8 Pins
supply voltage of 15V
119.08dB voltage gain

OP42AZ/883C Applications


There are a lot of Analog Devices Inc. OP42AZ/883C Instrumentational OP Amps applications.

  • Video computer boards
  • Information processing
  • Band-stop filter
  • Displayers for aircraft and air transportation control systems
  • Voltage regulation circuit
  • pH (acidity)
  • Industrial applications including automation
  • High-frequency data acquisition systems
  • Communication
  • Broadcasting

Write a review

Note: HTML is not translated!
    Bad           Good