OP42GPZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 months ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Base Part Number | OP42 |
| Pin Count | 8 |
| Number of Channels | 1 |
| Operating Supply Current | 6.5mA |
| Nominal Supply Current | 5mA |
| Max Supply Current | 6.5mA |
| Quiescent Current | 5.1mA |
| Slew Rate | 50V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 92 dB |
| Current - Input Bias | 130pA |
| Voltage - Supply, Single/Dual (±) | ±8V~20V |
| Output Current per Channel | 33mA |
| Input Offset Voltage (Vos) | 1.2mV |
| Bandwidth | 10MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 10000 kHz |
| Voltage Gain | 119.08dB |
| Average Bias Current-Max (IIB) | 0.002μA |
| Power Supply Rejection Ratio (PSRR) | 98dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 20V |
| Voltage - Input Offset | 1.5mV |
| Settling Time | 1 μs |
| Low-Bias | YES |
| Bias Current-Max (IIB) @25C | 0.00025μA |
| Dual Supply Voltage | 15V |
| Input Capacitance | 6pF |
| Neg Supply Voltage-Max (Vsup) | -20V |
| Input Offset Current-Max (IIO) | 0.0004μA |
| Input Voltage Noise Density | 38nV/sqrt Hz |
| Height | 3.43mm |
| Length | 9.27mm |
| Width | 7.24mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
OP42GPZ Overview
The linear amplifier is packaged in a 8-DIP (0.300, 7.62mm) case. The instrumentation amplifier in this picture is of the J-FET-type. The op amp is delivered to you in a Tube case. During the past two weeks, there have been close to 8 terminations. A total of 8 pins are located on this board. The linear amplifier should be run at 15V at all times, so please keep that in mind when using it. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. Linear amplifier includes 8 pins. With regard to input offset voltage, instrumentation amplifier is rated at 1.2mV. This electronic part is best mounted with type Through Hole. With regard to operating temperature, op amp ranges -40°C~85°C. Using an 6.5mA supply current, this operational amplifier ics can be operated. 119.08dB should remain the voltage gain. Instrumentation amplifier has 1 channels on it. As a result, linear amplifier's quiescent current is 5.1mA.
OP42GPZ Features
8 Pins
supply voltage of 15V
119.08dB voltage gain
OP42GPZ Applications
There are a lot of Analog Devices Inc. OP42GPZ Instrumentational OP Amps applications.
- Computer workstations
- Car stereo
- Laptop
- Power control
- Semiconductor detectors
- Comparator
- Test equipment
- Portable docking station
- Navigation
- Proportional counter tubes
