OP42GS-REEL
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | OP42 |
| Pin Count | 8 |
| Number of Channels | 1 |
| Operating Supply Current | 5.1mA |
| Quiescent Current | 6.5mA |
| Slew Rate | 50V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 92 dB |
| Current - Input Bias | 130pA |
| Voltage - Supply, Single/Dual (±) | ±8V~20V |
| Output Current per Channel | 33mA |
| Input Offset Voltage (Vos) | 1.5mV |
| Gain Bandwidth Product | 10MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 10000 kHz |
| Voltage Gain | 119.08dB |
| Average Bias Current-Max (IIB) | 0.002μA |
| Power Supply Rejection Ratio (PSRR) | 98.42dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 20V |
| Low-Bias | YES |
| Bias Current-Max (IIB) @25C | 0.00025μA |
| Dual Supply Voltage | 15V |
| Input Capacitance | 6pF |
| Neg Supply Voltage-Max (Vsup) | -20V |
| Input Voltage Noise Density | 38nV/sqrt Hz |
| Length | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
OP42GS-REEL Overview
Op amp is packaged in 8-SOIC (0.154, 3.90mm Width) case. There are two types of operational amplifiers in this circuit. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. There have been a total of 8 terminations over the past year. It consists of a total of 8 pins in total. This linear amplifier should be powered by an 15V battery. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. 8 pins are located on the operational amplifiers. As far as the input offset voltage is concerned, linear amplifier rates at 1.5mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. Using a supply current of 5.1mA , this buffer op amp will be able to operate. There should be no change in the voltage gain. There are a total of 1 channels available on the op amps. This linear amplifier pack is based on the TAPE AND REEL axis. There is a quiescent current of 6.5mA in this operational amplifier circuit.
OP42GS-REEL Features
8 Pins
supply voltage of 15V
119.08dB voltage gain
OP42GS-REEL Applications
There are a lot of Analog Devices Inc. OP42GS-REEL Instrumentational OP Amps applications.
- Industrial control system
- Television broadcasting equipment
- Inverse/same-phase proportional circuit
- Instrumentation
- Exponential operation circuits
- Active probe
- Addition operation circuits
- Video data acquisition
- Radiation thermometry transducers
- Hand-held batteries
