OP42GSZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 months ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | OP42 |
| Pin Count | 8 |
| Number of Channels | 1 |
| Operating Supply Current | 6.5mA |
| Max Supply Current | 6.5mA |
| Quiescent Current | 5.1mA |
| Slew Rate | 50V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 92 dB |
| Current - Input Bias | 130pA |
| Voltage - Supply, Single/Dual (±) | ±8V~20V |
| Output Current per Channel | 33mA |
| Input Offset Voltage (Vos) | 1.2mV |
| Bandwidth | 10MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 10000 kHz |
| Voltage Gain | 119.08dB |
| Average Bias Current-Max (IIB) | 0.002μA |
| Power Supply Rejection Ratio (PSRR) | 98dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 20V |
| Voltage - Input Offset | 1.5mV |
| Settling Time | 800 ns |
| Low-Bias | YES |
| Bias Current-Max (IIB) @25C | 0.00025μA |
| Dual Supply Voltage | 15V |
| Input Capacitance | 6pF |
| Neg Supply Voltage-Max (Vsup) | -20V |
| Input Voltage Noise Density | 38nV/sqrt Hz |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
OP42GSZ Overview
In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. This is a J-FET type op amp. The case in which buffer amplifier is delivered is called a Tube case. The number of terminations approaches 8. Linear amplifier has a total of 8 pins. This linear amplifier should be powered by an 15V battery. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. 8 pins are included on the operational amplifiers. Op amp ic rates 1.2mV for input offset voltage. This electronic component is recommended to be mounted using the mounting type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . An 6.5mA volt supply current is needed for this linear amplifier to operate. 119.08dB should be the voltage gain. 1 channels are available on the instrumentation amplifier. Buffer amplifier has a quiescent current of 5.1mA.
OP42GSZ Features
8 Pins
supply voltage of 15V
119.08dB voltage gain
OP42GSZ Applications
There are a lot of Analog Devices Inc. OP42GSZ Instrumentational OP Amps applications.
- Proportional operation circuits
- Industrial control system
- Computer workstations
- Micro signal measurement
- Wireless base stations
- Professional videography
- Television broadcasting equipment
- Polarized electrodes
- Hand-held batteries
- Navigation
