OP462GSZ-REEL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | OP462 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 9V |
| Number of Channels | 4 |
| Operating Supply Current | 3.1mA |
| Nominal Supply Current | 2.8mA |
| Quiescent Current | 775μA |
| Slew Rate | 13V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 110 dB |
| Current - Input Bias | 260nA |
| Voltage - Supply, Single/Dual (±) | 2.7V~12V ±1.35V~6V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 325μV |
| Gain Bandwidth Product | 15MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 15000 kHz |
| Voltage Gain | 98.89dB |
| Average Bias Current-Max (IIB) | 0.65μA |
| Power Supply Rejection Ratio (PSRR) | 110dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 25μV |
| Settling Time | 475 ns |
| Bias Current-Max (IIB) @25C | 0.6μA |
| Dual Supply Voltage | 5V |
| Input Voltage Noise Density | 9.5nV/sqrt Hz |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
OP462GSZ-REEL Overview
Op amp is packaged in 14-SOIC (0.154, 3.90mm Width) case. Buffer amps of this type are called General Purpose-types. A Tape & Reel (TR) case is used to deliver the buffer op amp. It is estimated that there will be 14 terminations in the next few months. A total of 14 pins are attached to buffer op amp. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. It should be noted that this op amp is a type of Operational Amplifier device. A total of 14 pins are present on the instrumentation amplifier. Op amp ic rates 325μV for input offset voltage. This electrical part should be mounted using type Surface Mount. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. Using an 3.1mA supply current, this operational amplifier ics can be operated. Voltage gain should remain at 98.89dB. The op amp ic has 4 channels on it. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. The operating supply voltage of the buffer op amp is rated at 9V. For the packing of the instrumentation amplifier, TAPE AND REEL is adopted. Currently, linear amplifier is operating with a quiescent current of 775μA.
OP462GSZ-REEL Features
14 Pins
supply voltage of 5V
98.89dB voltage gain
Output Type: Rail-to-Rail
OP462GSZ-REEL Applications
There are a lot of Analog Devices Inc. OP462GSZ-REEL Instrumentational OP Amps applications.
- Radiation thermometry transducers
- Automation control systems
- Switching amplifier
- Portable media players
- Broadcasting
- Radar
- Weighing systems
- High input resistance broadband
- Computer workstations
- Vehicle electronics
