OP467GPZ
| Parameters | |
|---|---|
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 22000 kHz |
| Voltage Gain | 83dB |
| Average Bias Current-Max (IIB) | 0.7μA |
| Power Supply Rejection Ratio (PSRR) | 120dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 200μV |
| Settling Time | 200 ns |
| Bias Current-Max (IIB) @25C | 0.6μA |
| Dual Supply Voltage | 15V |
| Input Capacitance | 2pF |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Input Voltage Noise Density | 7nV/sqrt Hz |
| Height | 3.3mm |
| Length | 19.05mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | OP467 |
| Pin Count | 14 |
| Number of Channels | 4 |
| Operating Supply Current | 10mA |
| Nominal Supply Current | 10mA |
| Max Supply Current | 10mA |
| Quiescent Current | 8mA |
| Slew Rate | 350V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 150nA |
| Max Input Voltage | 12V |
| Voltage - Supply, Single/Dual (±) | ±4.5V~18V |
| Supply Type | Dual |
| Input Offset Voltage (Vos) | 500μV |
| Bandwidth | 28MHz |
OP467GPZ Overview
It is packaged in an 14-DIP (0.300, 7.62mm)-case that protects the operational amplifiers from damage. Op amps are General Purpose types of amplifier on the chip. There is a Tube case that is delivered with the instrumentation amplifiers. In recent months, the number of terminations has approached 14. There are a total of 14 pins on this op amp. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. It has 14 pins that make up the linear amplifier. With regards to the offset voltage of the input, buffer amplifier is rated at 500μV. It is recommended that this electronic component be mounted using the Through Hole mounting type. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . Using an 10mA supply current, this operational amplifier ics can be operated. 83dB should remain the voltage gain. As far as the device is concerned, buffer amplifier has 4 channels. Currently, linear amplifier is operating with a quiescent current of 8mA.
OP467GPZ Features
14 Pins
supply voltage of 5V
83dB voltage gain
OP467GPZ Applications
There are a lot of Analog Devices Inc. OP467GPZ Instrumentational OP Amps applications.
- pH (acidity)
- Industrial control system
- Video computer boards
- Power control
- Signal transformation
- Tablets
- earphone
- Video data acquisition
- High input resistance broadband
- Thermocouples
