OP467GSZ-REEL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | OP467 |
| Pin Count | 16 |
| Number of Channels | 4 |
| Operating Supply Current | 10mA |
| Nominal Supply Current | 10mA |
| Quiescent Current | 8mA |
| Slew Rate | 350V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 150nA |
| Voltage - Supply, Single/Dual (±) | ±4.5V~18V |
| Supply Type | Dual |
| Input Offset Voltage (Vos) | 500μV |
| Gain Bandwidth Product | 28MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 22000 kHz |
| Voltage Gain | 83dB |
| Average Bias Current-Max (IIB) | 0.7μA |
| Power Supply Rejection Ratio (PSRR) | 120dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 200μV |
| Settling Time | 200 ns |
| Bias Current-Max (IIB) @25C | 0.6μA |
| Dual Supply Voltage | 15V |
| Input Capacitance | 2pF |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Input Voltage Noise Density | 7nV/sqrt Hz |
| Height Seated (Max) | 2.65mm |
| Length | 10.3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
OP467GSZ-REEL Overview
Op amp is packaged in 16-SOIC (0.295, 7.50mm Width) case. This is a General Purpose type op amp. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. A total of 16 terminations have been reported in the past few weeks. The pins on this board total to 16 in total. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. A total of 16 pins are present on the instrumentation amplifier. Regarding input offset voltage, op amp rates 500μV. This electronic part is recommended for mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. Using an 10mA supply current, this operational amplifier ics can be operated. The voltage gain should stay at 83dB. The op amp ic has 4 channels on it. For the packing of the instrumentation amplifier, TAPE AND REEL is adopted. There is an 8mA quiescent current in linear amplifier.
OP467GSZ-REEL Features
16 Pins
supply voltage of 5V
83dB voltage gain
OP467GSZ-REEL Applications
There are a lot of Analog Devices Inc. OP467GSZ-REEL Instrumentational OP Amps applications.
- Division circuits
- Semiconductor detectors
- Multimedia playback equipment
- Differentiator circuits
- Voltage regulation circuit
- Home audio systems
- Micro signal measurement
- High/low-pass filter circuit
- Automatic control
- High speed sample
