OP470GPZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Base Part Number | OP470 |
| Pin Count | 14 |
| Operating Supply Voltage | 15V |
| Number of Channels | 4 |
| Operating Supply Current | 11mA |
| Nominal Supply Current | 11mA |
| Quiescent Current | 2.75mA |
| Slew Rate | 2V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 120 dB |
| Current - Input Bias | 25nA |
| Voltage - Supply, Single/Dual (±) | 9V~36V ±4.5V~18V |
| Input Offset Voltage (Vos) | 400μV |
| Bandwidth | 6MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 6000 kHz |
| Voltage Gain | 124.61dB |
| Average Bias Current-Max (IIB) | 0.075μA |
| Power Supply Rejection Ratio (PSRR) | 120dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Settling Time | 6 μs |
| Bias Current-Max (IIB) @25C | 0.06μA |
| Dual Supply Voltage | 15V |
| Input Capacitance | 2pF |
| Height | 3.3mm |
| Length | 19.05mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
OP470GPZ Overview
Packaging for the buffer amplifier is in the form of a 14-DIP (0.300, 7.62mm) case. The instrumentation amplifier in this picture is of the General Purpose-type. There is a Tube case that is delivered with the instrumentation amplifiers. It is estimated that there will be 14 terminations in the next few months. Linear amplifier has a total of 14 pins. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. It should be noted that this op amp is a type of Operational Amplifier device. Linear amplifier includes 14 pins. The input offset voltage is 400μV. For this electrical component, Through Hole is the recommended mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . The buffer amplifier is capable of operating from a supply current of 11mA . Maintain 124.61dB as the voltage gain. Instrumentation amplifier has 4 channels on it. The operating supply voltage of the buffer op amp is rated at 15V. 2.75mA quiescent currents are flowing through buffer op amp.
OP470GPZ Features
14 Pins
supply voltage of 15V
124.61dB voltage gain
OP470GPZ Applications
There are a lot of Analog Devices Inc. OP470GPZ Instrumentational OP Amps applications.
- Semiconductor detectors
- Weighing systems
- Band-pass filter
- Image computer boards
- pH (acidity)
- Measurements of Wheatstone bridge
- High input resistance broadband
- Large motor controllers
- earphone
- Ultrasound transducers
