OP470GS-REEL
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | OP470 |
| Pin Count | 16 |
| Power Supplies | +-15V |
| Number of Channels | 4 |
| Operating Supply Current | 9mA |
| Quiescent Current | 2.75mA |
| Supply Current-Max | 11mA |
| Slew Rate | 2V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 120 dB |
| Current - Input Bias | 25nA |
| Voltage - Supply, Single/Dual (±) | 9V~36V ±4.5V~18V |
| Input Offset Voltage (Vos) | 400μV |
| Gain Bandwidth Product | 6MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 6000 kHz |
| Voltage Gain | 124.61dB |
| Average Bias Current-Max (IIB) | 0.075μA |
| Power Supply Rejection Ratio (PSRR) | 120dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Bias Current-Max (IIB) @25C | 0.06μA |
| Input Capacitance | 2pF |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Input Voltage Noise Density | 3.8nV/sqrt Hz |
| Height Seated (Max) | 2.65mm |
| Length | 10.3mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
OP470GS-REEL Overview
In order to protect the op amps, a 16-SOIC (0.295, 7.50mm Width) case is used. This is a General Purpose type op amp. Linear amplifier is delivered in a Tape & Reel (TR) case. In recent months, the number of terminations has approached 16. A total of 16 pins are attached to buffer op amp. This linear amplifier should be powered by an 15V battery. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. 16 pins are available on the instrumentation amplifier. The input offset voltage is 400μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~85°C . As long as the supply current of the chip does not exceed 9mA, this op amp ic can operate. It is recommended to keep the voltage gain at 124.61dB at all times. There are a total of 4 channels available on the op amps. For the packing of the instrumentation amplifier, TAPE AND REEL is adopted. As a result, linear amplifier's quiescent current is 2.75mA.
OP470GS-REEL Features
16 Pins
supply voltage of 15V
124.61dB voltage gain
OP470GS-REEL Applications
There are a lot of Analog Devices Inc. OP470GS-REEL Instrumentational OP Amps applications.
- Computer workstations
- Non-polarized electrodes
- RF cable systems
- Logarithmic operation circuits
- Commercial audio systems
- Portable docking station
- Active probe
- Multimedia playback equipment
- Exponential operation circuits
- Integrator circuits
