OP470GSZ-REEL
| Parameters | |
|---|---|
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | OP470 |
| Pin Count | 16 |
| Number of Channels | 4 |
| Operating Supply Current | 11mA |
| Nominal Supply Current | 11mA |
| Quiescent Current | 2.75mA |
| Slew Rate | 2V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 120 dB |
| Current - Input Bias | 25nA |
| Voltage - Supply, Single/Dual (±) | 9V~36V ±4.5V~18V |
| Supply Type | Dual |
| Input Offset Voltage (Vos) | 400μV |
| Gain Bandwidth Product | 6MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 6000 kHz |
| Voltage Gain | 124.61dB |
| Average Bias Current-Max (IIB) | 0.075μA |
| Power Supply Rejection Ratio (PSRR) | 120dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Settling Time | 6 μs |
| Bias Current-Max (IIB) @25C | 0.06μA |
| Dual Supply Voltage | 15V |
| Input Capacitance | 2pF |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Height Seated (Max) | 2.65mm |
| Length | 10.3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
OP470GSZ-REEL Overview
There is a 16-SOIC (0.295, 7.50mm Width) case in which the instrumentation amplifier is packaged. Op amps are General Purpose types of amplifier on the chip. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. The number of terminations approaches 16. In total, there are 16 pins on this op amp ic. The linear amplifier should be run at 15V at all times, so please keep that in mind when using it. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. An 16-pin op amp ic is included in the package. In terms of input offset voltage, operational amplifier rates 400μV. This electronic part is recommended for mounting type Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~85°C . It is possible to operate this buffer amplifier from a supply current of 11mA . You should keep the voltage gain at 124.61dB for the time being. 4 channels are available on the instrumentation amplifier. As a result of this, the buffer amplifier is packed in TAPE AND REEL. Buffer amplifier has a quiescent current of 2.75mA.
OP470GSZ-REEL Features
16 Pins
supply voltage of 15V
124.61dB voltage gain
OP470GSZ-REEL Applications
There are a lot of Analog Devices Inc. OP470GSZ-REEL Instrumentational OP Amps applications.
- Signal transformation
- Signal filtering
- Switching amplifier
- Power generator
- Video computer boards
- Thermocouples
- Television
- Portable electronic products powered by batteries
- PDA
- ECG equipment
