Parameters |
Power Supply Rejection Ratio (PSRR) |
105dB |
Low-Offset |
NO |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
18V |
Voltage - Input Offset |
1mV |
Settling Time |
7.5 μs |
Bias Current-Max (IIB) @25C |
0.06μA |
Input Capacitance |
2.6pF |
Height |
2.35mm |
Length |
10.5mm |
Width |
7.6mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 3 months ago) |
Contact Plating |
Tin |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.295, 7.50mm Width) |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Subcategory |
Operational Amplifier |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
15V |
Terminal Pitch |
1.27mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
OP471 |
Pin Count |
16 |
Operating Supply Voltage |
15V |
Number of Channels |
4 |
Operating Supply Current |
11mA |
Nominal Supply Current |
11mA |
Quiescent Current |
2.75mA |
Slew Rate |
8V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
115 dB |
Current - Input Bias |
25nA |
Voltage - Supply, Single/Dual (±) |
±4.5V~18V |
Input Offset Voltage (Vos) |
800μV |
Bandwidth |
6.5MHz |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Unity Gain BW-Nom |
6500 kHz |
Voltage Gain |
113.98dB |
Average Bias Current-Max (IIB) |
0.06μA |
OP471GSZ Overview
There is a 16-SOIC (0.295, 7.50mm Width) case package that contains the instrumentation amplifiers. General Purpose-type instrumentation amplifiers are used in this application. In the case of Tube cases, linear amplifier will be delivered. The number of terminations approaches 16. The total number of pins on linear amplifier is 16. The linear amplifier should be run at 15V at all times, so please keep that in mind when using it. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. In total, the buffer amplifier consists of 16 pins. Regarding input offset voltage, buffer amplifier rates 800μV voltage. Surface Mount is the recommended mounting type for this linear amplifier. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 11mA and 10 . Voltage gain should remain at 113.98dB. There are a total of 4 channels available on the op amps. The operating supply voltage of instrumentation amplifier is rated 15V voltage. Currently, linear amplifier is operating with a quiescent current of 2.75mA.
OP471GSZ Features
16 Pins
supply voltage of 15V
113.98dB voltage gain
OP471GSZ Applications
There are a lot of Analog Devices Inc. OP471GSZ Instrumentational OP Amps applications.
- Home audio systems
- Addition operation circuits
- Logarithmic operation circuits
- MP3
- Multimedia playback equipment
- Digital cameras
- Voltage regulation circuit
- Proportional counter tubes
- Measurements of Wheatstone bridge
- Division circuits