OP481GRUZ-REEL
| Parameters | |
|---|---|
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Number of Channels | 4 |
| Operating Supply Current | 20μA |
| Quiescent Current | 5μA |
| Slew Rate | 0.028V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 95 dB |
| Current - Input Bias | 3nA |
| Voltage - Supply, Single/Dual (±) | 2.7V~12V ±1.35V~6V |
| Output Current per Channel | 12mA |
| Input Offset Voltage (Vos) | 1.5mV |
| Gain Bandwidth Product | 105kHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 105 kHz |
| Voltage Gain | 83.52dB |
| Average Bias Current-Max (IIB) | 0.01μA |
| Power Supply Rejection Ratio (PSRR) | 95dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 8V |
| Voltage - Input Offset | 100μV |
| Low-Bias | NO |
| Micropower | YES |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Neg Supply Voltage-Max (Vsup) | -8V |
| Wideband | NO |
| Input Voltage Noise Density | 75nV/sqrt Hz |
| Height Seated (Max) | 1.2mm |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | OP481 |
OP481GRUZ-REEL Overview
It is packaged in an 14-TSSOP (0.173, 4.40mm Width)-case that protects the operational amplifiers from damage. An op amp ic of the General Purpose type. A Tape & Reel (TR) case is used for delivering the op amp. There have been a total of 14 terminations over the past year. In total, there are 14 pins on this op amp ic. I would like to remind you that this buffer op amp should be powered by an 5V battery. It should be noted that this op amp is a type of Operational Amplifier device. Linear amplifier includes 14 pins. Regarding input offset voltage, op amp rates 1.5mV. Surface Mount is the recommended mounting type for this linear amplifier. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . You can run this op amp ic on 20μA . Maintain 83.52dB as the voltage gain. 4 channels are available on the instrumentation amplifier. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. To pack the operational amplifier ics, TAPE AND REEL is adopted as the packing method. Buffer amplifier has a quiescent current of 5μA.
OP481GRUZ-REEL Features
14 Pins
supply voltage of 5V
83.52dB voltage gain
Output Type: Rail-to-Rail
OP481GRUZ-REEL Applications
There are a lot of Analog Devices Inc. OP481GRUZ-REEL Instrumentational OP Amps applications.
- Inverse/same-phase proportional circuit
- Television broadcasting equipment
- Band-pass filter
- Displayers for aircraft and air transportation control systems
- Automation control systems
- High gain DC amplifier
- Communication device
- Professional videography
- Signal operation
- Instrumentation
