OP482GSZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | JFET |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | OP482 |
| Pin Count | 14 |
| Power Supplies | +-15V |
| Number of Channels | 4 |
| Operating Supply Current | 1mA |
| Quiescent Current | 250μA |
| Slew Rate | 9V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 3pA |
| Voltage - Supply, Single/Dual (±) | 9V~36V ±4.5V~18V |
| Output Current per Channel | 12mA |
| Input Offset Voltage (Vos) | 4mV |
| Bandwidth | 4MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 4000 kHz |
| Voltage Gain | 86.02dB |
| Average Bias Current-Max (IIB) | 0.0005μA |
| Power Supply Rejection Ratio (PSRR) | 92dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 200μV |
| Settling Time | 1.6 μs |
| Current - Output / Channel | 10mA |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.0001μA |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Height | 1.5mm |
| Length | 8.75mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
OP482GSZ Overview
Packaged in a 14-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. An op amp ic of the J-FET type. The case in which buffer amplifier is delivered is called a Tube case. A total of 14 terminations have been reported in the past few weeks. Linear amplifier has a total of 14 pins. Please take in mind that this instrumentation amplifier should be run at 15V. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. The buffer op amp includes 14 pins. Op amp rates 4mV as input offset voltage. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . As long as the supply current of the chip does not exceed 1mA, this op amp ic can operate. 86.02dB should remain the voltage gain. Buffer op amp is equipped with 4 channels on the device. As a result, linear amplifier's quiescent current is 250μA.
OP482GSZ Features
14 Pins
supply voltage of 15V
86.02dB voltage gain
OP482GSZ Applications
There are a lot of Analog Devices Inc. OP482GSZ Instrumentational OP Amps applications.
- Active probe
- Medical instruments
- earphone
- pH (acidity)
- Oscilloscopes
- Test equipment
- Communication
- Semiconductor detectors
- Proportional counter tubes
- Commercial audio systems
