OP484ES
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | OP484 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Power Supplies | +-1.5/+-18/3/36V |
| Number of Channels | 4 |
| Operating Supply Current | 8mA |
| Max Supply Current | 5.8mA |
| Quiescent Current | 2mA |
| Slew Rate | 4V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 80nA |
| Voltage - Supply, Single/Dual (±) | 3V~36V ±1.5V~18V |
| Output Current per Channel | 10mA |
| Input Offset Voltage (Vos) | 150μV |
| Bandwidth | 4MHz |
| Gain Bandwidth Product | 4.25MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 4250 kHz |
| Voltage Gain | 107.6dB |
| Average Bias Current-Max (IIB) | 0.575μA |
| Power Supply Rejection Ratio (PSRR) | 90dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Settling Time | 4 μs |
| Dual Supply Voltage | 3V |
| Input Voltage Noise Density | 3.9nV/sqrt Hz |
| Height | 1.5mm |
| Length | 8.75mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
OP484ES Overview
It is packaged in an 14-SOIC (0.154, 3.90mm Width)-case that protects the operational amplifiers from damage. An op amp of this type is a General Purpose-type. There is a Tube case that is delivered with the instrumentation amplifiers. The number of terminations is approaching the 14 mark. Buffer amplifier has a total of 14 pins on it. It is important to remember that this op amp should be operated at a voltage of 15V volts. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. The op amp ic has an array of 14 pins on it. With regard to input offset voltage, instrumentation amplifier is rated at 150μV. This electrical part should be mounted using type Surface Mount. It is important to note that this linear amplifier works well at a temperature of -40°C~125°C when it comes to operating temperatureA supply current of 8mA can be used to operate this linear amplifier. 107.6dB should be the voltage gain. Instrumentation amplifier has 4 channels on it. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. The operating supply voltage of instrumentation amplifier is rated 5V voltage. This linear amplifier pack is based on the TAPE AND REEL axis. Buffer amplifier has a quiescent current of 2mA.
OP484ES Features
14 Pins
supply voltage of 15V
107.6dB voltage gain
Output Type: Rail-to-Rail
OP484ES Applications
There are a lot of Analog Devices Inc. OP484ES Instrumentational OP Amps applications.
- Signal operation
- Displayers for aircraft and air transportation control systems
- Fission chambers
- E-book readers
- Signal amplification
- Multimedia playback equipment
- earphone
- Signal filtering
- Vehicle electronics
- Measurements of Wheatstone bridge
