OP484FSZ

4 Channels 10mA per Channel 80nA 90 dB Instrumentational OP Amps 0.575μA 18V 3V~36V ±1.5V~18V OP484 14 Pins 14-SOIC (0.154, 3.90mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-OP484FSZ
Package: 14-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 951
Description: 4 Channels 10mA per Channel 80nA 90 dB Instrumentational OP Amps 0.575μA 18V 3V~36V ±1.5V~18V OP484 14 Pins 14-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 3 months ago)
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	14-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	14
Operating Temperature	-40°C~125°C
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	14
ECCN Code	EAR99
Subcategory	Operational Amplifier
Packing Method	TAPE AND REEL
Technology	BIPOLAR
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	15V
Terminal Pitch	1.27mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	OP484
Pin Count	14
Output Type	Rail-to-Rail
Operating Supply Voltage	18V
Power Supplies	+-1.5/+-18/3/36V
Number of Channels	4
Operating Supply Current	8mA
Nominal Supply Current	2.25mA
Output Current	10mA
Max Supply Current	5.8mA
Quiescent Current	2mA
Slew Rate	4V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	90 dB
Current - Input Bias	80nA
Voltage - Supply, Single/Dual (±)	3V~36V ±1.5V~18V
Output Current per Channel	10mA
Supply Type	Dual, Single
Input Offset Voltage (Vos)	150μV
Bandwidth	4.25MHz
Neg Supply Voltage-Nom (Vsup)	-15V
Unity Gain BW-Nom	4250 kHz
Voltage Gain	107.6dB
Average Bias Current-Max (IIB)	0.575μA
Power Supply Rejection Ratio (PSRR)	90dB
Low-Offset	YES
Frequency Compensation	YES
Voltage - Input Offset	250μV
Settling Time	4 μs
Dual Supply Voltage	15V
Input Voltage Noise Density	3.9nV/sqrt Hz
Height	1.5mm
Length	8.75mm
Width	4mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

OP484FSZ Overview

In order to protect the op amps, a 14-SOIC (0.154, 3.90mm Width) case is used. Op amps are General Purpose types of amplifier on the chip. A Tube case is used for delivering the op amp. There is a growing number of terminations approaching the number of 14. Buffer amplifier has a total of 14 pins. Please take in mind that this instrumentation amplifier should be run at 15V. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. There are 14 pins on this chip. As far as the input offset voltage is concerned, linear amplifier rates at 150μV. For this electronic part, it is recommended that you mount it with type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . Using an 8mA supply current, this operational amplifier ics can be operated. Voltage gain should remain at 107.6dB. There are 4 channels on the operational amplifiers. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. The operating supply voltage of the buffer op amp is rated at 18V. An buffer amplifier is packed in a TAPE AND REEL-shape according to the design. The quiescent current is 2mA.