OP490GSZ-REEL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | OP490 |
| Pin Count | 16 |
| Operating Supply Voltage | 28V |
| Power Supplies | 3/30/+-1.5/+-15V |
| Number of Channels | 4 |
| Operating Supply Current | 80μA |
| Nominal Supply Current | 80μA |
| Quiescent Current | 20μA |
| Slew Rate | 0.012V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 120 dB |
| Current - Input Bias | 4.2nA |
| Voltage - Supply, Single/Dual (±) | 1.6V~36V ±0.8V~18V |
| Input Offset Voltage (Vos) | 1mV |
| Gain Bandwidth Product | 20kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 20 kHz |
| Voltage Gain | 118.06dB |
| Average Bias Current-Max (IIB) | 0.025μA |
| Power Supply Rejection Ratio (PSRR) | 109dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 600μV |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.025μA |
| Height Seated (Max) | 2.65mm |
| Length | 10.3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
OP490GSZ-REEL Overview
Op amp is packaged in 16-SOIC (0.295, 7.50mm Width) case. Op amps are General Purpose types of amplifier on the chip. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. The number of terminations approaches 16. Linear amplifier has a total of 16 pins. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. There are 16 pins on this chip. With regard to input offset voltage, instrumentation amplifier is rated at 1mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . The buffer amplifier is capable of operating from a supply current of 80μA . 118.06dB should remain the voltage gain. Instrumentation amplifier has 4 channels on it. The operating supply voltage of the buffer op amp is rated at 28V. It is used TAPE AND REEL to pack the op amps. As a result, linear amplifier's quiescent current is 20μA.
OP490GSZ-REEL Features
16 Pins
supply voltage of 15V
118.06dB voltage gain
OP490GSZ-REEL Applications
There are a lot of Analog Devices Inc. OP490GSZ-REEL Instrumentational OP Amps applications.
- Commercial audio systems
- High input resistance broadband
- Addition operation circuits
- Home audio systems
- ECG equipment
- Switching amplifier
- Band-pass filter
- Medical instruments
- Biopotential
- Test and measurement instruments
