OP491GPZ
| Parameters | |
|---|---|
| Number of Channels | 4 |
| Operating Supply Current | 260μA |
| Nominal Supply Current | 1.6mA |
| Max Supply Current | 1.6mA |
| Quiescent Current | 200μA |
| Slew Rate | 0.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 30nA |
| Voltage - Supply, Single/Dual (±) | 2.7V~12V ±1.35V~6V |
| Output Current per Channel | 16mA |
| Input Offset Voltage (Vos) | 700μV |
| Bandwidth | 3MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 3000 kHz |
| Voltage Gain | 96.9dB |
| Average Bias Current-Max (IIB) | 0.095μA |
| Power Supply Rejection Ratio (PSRR) | 110dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 8V |
| Voltage - Input Offset | 80μV |
| Settling Time | 22 μs |
| Low-Bias | NO |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.065μA |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Height | 3.3mm |
| Length | 19.05mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | OP491 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 9V |
| Power Supplies | +-1.35/+-6/2.7/12V |
OP491GPZ Overview
Packaged in a 14-DIP (0.300, 7.62mm) case, the buffer op amp is ready to use. An op amp of this type is a General Purpose-type. The case in which buffer amplifier is delivered is called a Tube case. The number of terminations approaches 14. In total, there are 14 pins on this op amp ic. This linear amplifier should be powered by an 5V battery. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. A total of 14 pins are present on the instrumentation amplifier. Op amp rates 700μV as input offset voltage. For this electronic part, it is recommended that you mount it with type Through Hole. With regard to operating temperature, this op amp functions well at -40°C~125°C. An 260μA volt supply current is needed for this linear amplifier to operate. It is a member of the 96.9dB's 96.9dB family. There are a total of 4 channels available on the op amps. On the output type, there are Rail-to-Rail different types of op amps. The operating supply voltage of the buffer op amp is rated at 9V. Linear amplifier has a quiescent current of 200μA.
OP491GPZ Features
14 Pins
supply voltage of 5V
96.9dB voltage gain
Output Type: Rail-to-Rail
OP491GPZ Applications
There are a lot of Analog Devices Inc. OP491GPZ Instrumentational OP Amps applications.
- MP3
- Integrator circuits
- Vehicle electronics
- PDA
- Automation control systems
- Portable docking station
- Medical instruments
- Subtraction operation circuits
- Test equipment
- Proportional counter tubes
