OP491GRUZ-REEL

4 Channels 16mA per Channel 30nA 100 dB Instrumentational OP Amps 0.095μA 9V 2.7V~12V ±1.35V~6V OP491 14 Pins 14-TSSOP (0.173, 4.40mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-OP491GRUZ-REEL
Package: 14-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 209
Description: 4 Channels 16mA per Channel 30nA 100 dB Instrumentational OP Amps 0.095μA 9V 2.7V~12V ±1.35V~6V OP491 14 Pins 14-TSSOP (0.173, 4.40mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
ECCN Code	EAR99
Terminal Finish	Matte Tin (Sn)
Subcategory	Operational Amplifier
Packing Method	TAPE AND REEL
Technology	BICMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	5V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	OP491
Pin Count	14
Output Type	Rail-to-Rail
Operating Supply Voltage	9V
Power Supplies	+-1.35/+-6/2.7/12V
Number of Channels	4
Operating Supply Current	260μA
Nominal Supply Current	1.6mA
Quiescent Current	200μA
Slew Rate	0.5V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	100 dB
Current - Input Bias	30nA
Voltage - Supply, Single/Dual (±)	2.7V~12V ±1.35V~6V
Output Current per Channel	16mA
Input Offset Voltage (Vos)	700μV
Bandwidth	3MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Unity Gain BW-Nom	3000 kHz
Voltage Gain	96.9dB
Average Bias Current-Max (IIB)	0.095μA
Power Supply Rejection Ratio (PSRR)	110dB
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	8V
Voltage - Input Offset	80μV
Settling Time	22 μs
Low-Bias	NO
Micropower	YES
Bias Current-Max (IIB) @25C	0.065μA
Programmable Power	NO
Dual Supply Voltage	5V
Input Voltage Noise Density	42nV/sqrt Hz
Height Seated (Max)	1.2mm
Length	5mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 1 week ago)
Mounting Type	Surface Mount
Package / Case	14-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	14
Operating Temperature	-40°C~125°C
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14

OP491GRUZ-REEL Overview

There is a 14-TSSOP (0.173, 4.40mm Width) case package that contains the instrumentation amplifiers. An op amp ic of the General Purpose type. A Tape & Reel (TR) case is used for delivering the op amp. A total of 14 terminations have been reported in the past few weeks. There are a total of 14 pins on this op amp. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. 14 pins are available on the instrumentation amplifier. Op amp ic rates 700μV for input offset voltage. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . The buffer amplifier is capable of operating from a supply current of 260μA . There should be no change in the voltage gain at 96.9dB. As far as the device is concerned, buffer amplifier has 4 channels. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. The operating supply voltage of the buffer op amp is rated at 9V. TAPE AND REEL is adopted to pack the instrumentation amplifier. As a result, linear amplifier's quiescent current is 200μA.