OP491GSZ-REEL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | OP491 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 9V |
| Power Supplies | +-1.35/+-6/2.7/12V |
| Number of Channels | 4 |
| Operating Supply Current | 260μA |
| Nominal Supply Current | 1.6mA |
| Quiescent Current | 200μA |
| Slew Rate | 0.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 30nA |
| Voltage - Supply, Single/Dual (±) | 2.7V~12V ±1.35V~6V |
| Output Current per Channel | 16mA |
| Input Offset Voltage (Vos) | 700μV |
| Gain Bandwidth Product | 3MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 3000 kHz |
| Voltage Gain | 96.9dB |
| Average Bias Current-Max (IIB) | 0.095μA |
| Power Supply Rejection Ratio (PSRR) | 110dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 8V |
| Voltage - Input Offset | 80μV |
| Settling Time | 22 μs |
| Low-Bias | NO |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.065μA |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Wideband | NO |
| Input Voltage Noise Density | 42nV/sqrt Hz |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
OP491GSZ-REEL Overview
Packaged in a 14-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. General Purpose-type instrumentation amplifiers are used in this application. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. The number of terminations is approaching the 14 mark. In total, there are 14 pins on this op amp ic. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. Linear amplifier includes 14 pins. With regard to input offset voltage, instrumentation amplifier is rated at 700μV. For this electrical component, Surface Mount is the recommended mounting type. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~125°C . This op amp can operate from a supply current at 260μA. Op amp is a member of the 96.9dB's 96.9dB family. The op amp ic has 4 channels on it. On the output type, there are Rail-to-Rail different types of op amps. The operating supply voltage of instrumentation amplifier is rated 9V voltage. The instrumentation amplifier is packed in the form of TAPE AND REEL. There is a quiescent current of 200μA in this operational amplifier circuit.
OP491GSZ-REEL Features
14 Pins
supply voltage of 5V
96.9dB voltage gain
Output Type: Rail-to-Rail
OP491GSZ-REEL Applications
There are a lot of Analog Devices Inc. OP491GSZ-REEL Instrumentational OP Amps applications.
- Large motor controllers
- Portable media players
- Signal transformation
- Logarithmic operation circuits
- Scintillation detectors
- Test and measurement instruments
- Medical instruments
- single/dual op amp sum and difference circuits
- Test equipment
- Communication device
