OP492GS-REEL
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | OP492 |
| Pin Count | 14 |
| Power Supplies | +-15V |
| Number of Channels | 4 |
| Operating Supply Current | 1mA |
| Quiescent Current | 1.4mA |
| Supply Current-Max | 5.6mA |
| Slew Rate | 4V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 375nA |
| Voltage - Supply, Single/Dual (±) | 4.5V~33V ±2.25V~16.5V |
| Output Current per Channel | 10.5mA |
| Input Offset Voltage (Vos) | 1.4mV |
| Gain Bandwidth Product | 4MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 4000 kHz |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 5μA |
| Power Supply Rejection Ratio (PSRR) | 75dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 33V |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.7μA |
| Programmable Power | NO |
| Wideband | NO |
| Input Voltage Noise Density | 15nV/sqrt Hz |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
OP492GS-REEL Overview
The linear amplifier is packaged in a 14-SOIC (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. This is a General Purpose type op amp. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. It is estimated that there will be at least 14 terminations this year. The pins on this board total to 14 in total. Please take in mind that this instrumentation amplifier should be run at 5V. Instrumentation amplifier is a part of Operational Amplifier. A total of 14 pins are present on the instrumentation amplifier. As far as the input offset voltage is concerned, linear amplifier rates at 1.4mV. Surface Mount is the recommended mounting type of operational amplifiers. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. An 1mA volt supply current is needed for this linear amplifier to operate. The voltage gain should stay at 106.02dB. As far as the device is concerned, buffer amplifier has 4 channels. This linear amplifier pack is based on the TAPE AND REEL axis. There is an 1.4mA quiescent current running through op amp ic.
OP492GS-REEL Features
14 Pins
supply voltage of 5V
106.02dB voltage gain
OP492GS-REEL Applications
There are a lot of Analog Devices Inc. OP492GS-REEL Instrumentational OP Amps applications.
- Fission chambers
- Vehicle electronics
- Broadcasting
- MP3
- Semiconductor detectors
- Communication device
- Communication
- Video data acquisition
- single/dual op amp sum and difference circuits
- Blood pressure sensors
