OP495GS-REEL
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | OP495 |
| Pin Count | 16 |
| Output Type | Rail-to-Rail |
| Power Supplies | 3/30/+-1.5/+-15V |
| Number of Channels | 4 |
| Operating Supply Current | 175μA |
| Quiescent Current | 175μA |
| Supply Current-Max | 0.7mA |
| Slew Rate | 0.03V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 110 dB |
| Current - Input Bias | 7nA |
| Voltage - Supply, Single/Dual (±) | 3V~36V ±1.5V~18V |
| Output Current per Channel | 25mA |
| Input Offset Voltage (Vos) | 300μV |
| Gain Bandwidth Product | 85kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 85 kHz |
| Voltage Gain | 140dB |
| Average Bias Current-Max (IIB) | 0.03μA |
| Power Supply Rejection Ratio (PSRR) | 90dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.02μA |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Input Voltage Noise Density | 51nV/sqrt Hz |
| Height Seated (Max) | 2.65mm |
| Length | 10.3mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
OP495GS-REEL Overview
In order to protect the op amps, a 16-SOIC (0.295, 7.50mm Width) case is used. An op amp of this type is a General Purpose-type. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. We are approaching the 16h termination of the year. It consists of a total of 16 pins in total. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. 16 pins are included on the operational amplifiers. In terms of input offset voltage, operational amplifier rates 300μV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. An 175μA volt supply current is needed for this linear amplifier to operate. It is recommended to keep the voltage gain at 140dB at all times. Instrumentation amplifier has 4 channels on it. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. It is used TAPE AND REEL to pack the op amps. The quiescent current is 175μA.
OP495GS-REEL Features
16 Pins
supply voltage of 15V
140dB voltage gain
Output Type: Rail-to-Rail
OP495GS-REEL Applications
There are a lot of Analog Devices Inc. OP495GS-REEL Instrumentational OP Amps applications.
- Displayers for aircraft and air transportation control systems
- Video data acquisition
- Professional videography
- Information processing
- Ultrasound transducers
- Weighing systems
- Precision measurement
- Vehicle electronics
- Digital cameras
- Proportional counter tubes
