OP496GSZ
| Parameters | |
|---|---|
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | OP496 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 9V |
| Power Supplies | 3/12V |
| Number of Channels | 4 |
| Operating Supply Current | 240μA |
| Nominal Supply Current | 240μA |
| Max Supply Current | 240μA |
| Quiescent Current | 60μA |
| Slew Rate | 0.3V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 10nA |
| Voltage - Supply, Single/Dual (±) | 3V~12V ±1.5V~6V |
| Output Current per Channel | 4mA |
| Input Offset Voltage (Vos) | 300μV |
| Bandwidth | 450 kHz |
| Unity Gain BW-Nom | 350 kHz |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.05μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 15V |
| Voltage - Input Offset | 35μV |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.05μA |
| Height | 1.5mm |
| Length | 8.75mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
OP496GSZ Overview
Packaging for the buffer amplifier is in the form of a 14-SOIC (0.154, 3.90mm Width) case. An op amp ic of the General Purpose type. Linear amplifier is delivered in a Tube case. There is a growing number of terminations approaching the number of 14. Linear amplifier has a total of 14 pins. I would like to remind you that this buffer op amp should be powered by an 5V battery. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. An 14-pin op amp ic is included in the package. With regard to input offset voltage, instrumentation amplifier is rated at 300μV. Surface Mount is the recommended mounting type for this linear amplifier. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. This op amp can operate from a supply current at 240μA. 106.02dB should remain the voltage gain. There are 4 channels on the operational amplifiers. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. The operating supply voltage of the buffer op amp is rated at 9V. Currently, linear amplifier is operating with a quiescent current of 60μA.
OP496GSZ Features
14 Pins
supply voltage of 5V
106.02dB voltage gain
Output Type: Rail-to-Rail
OP496GSZ Applications
There are a lot of Analog Devices Inc. OP496GSZ Instrumentational OP Amps applications.
- Subtraction operation circuits
- Division circuits
- Commercial audio systems
- Video data acquisition
- Mobile phone
- Large motor controllers
- Active probe
- single/dual op amp sum and difference circuits
- Video conversion and routing
- Vehicle electronics
