OP496GSZ-REEL7
| Parameters | |
|---|---|
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | OP496 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Power Supplies | 3/12V |
| Number of Channels | 4 |
| Operating Supply Current | 240μA |
| Quiescent Current | 60μA |
| Supply Current-Max | 0.32mA |
| Slew Rate | 0.3V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 10nA |
| Voltage - Supply, Single/Dual (±) | 3V~12V ±1.5V~6V |
| Output Current per Channel | 4mA |
| Input Offset Voltage (Vos) | 300μV |
| Bandwidth | 85 kHz |
| Gain Bandwidth Product | 450kHz |
| Unity Gain BW-Nom | 350 kHz |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.05μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 15V |
| Voltage - Input Offset | 35μV |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.05μA |
| Input Voltage Noise Density | 26nV/sqrt Hz |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
OP496GSZ-REEL7 Overview
The linear amplifier is packaged in a 14-SOIC (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. An op amp ic of the General Purpose type. The op amp is delivered to you in a Tape & Reel (TR) case. We are approaching the 14h termination of the year. Buffer amplifier has a total of 14 pins. It is important to remember that this op amp should be operated at a voltage of 5V volts. To be specific, this instrumentation amplifier is a type of Operational Amplifier. A total of 14 pins are present on the instrumentation amplifier. With regard to input offset voltage, instrumentation amplifier is rated at 300μV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . Using an 240μA supply current, this operational amplifier ics can be operated. There should be no change in the voltage gain. The op amp ic has 4 channels on it. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. This linear amplifier pack is based on the TAPE AND REEL axis. Currently, linear amplifier is operating with a quiescent current of 60μA.
OP496GSZ-REEL7 Features
14 Pins
supply voltage of 5V
106.02dB voltage gain
Output Type: Rail-to-Rail
OP496GSZ-REEL7 Applications
There are a lot of Analog Devices Inc. OP496GSZ-REEL7 Instrumentational OP Amps applications.
- Computer workstations
- pH (acidity)
- Proportional counter tubes
- Industrial control system
- Band-pass filter
- Oscilloscopes
- High input resistance broadband
- RF cable systems
- Strain gauges
- Micro signal measurement
