OP497FSZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | OP497 |
| Pin Count | 16 |
| Power Supplies | +-15V |
| Number of Channels | 4 |
| Operating Supply Current | 2.5mA |
| Quiescent Current | 625μA |
| Supply Current-Max | 3mA |
| Slew Rate | 0.15V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 135 dB |
| Current - Input Bias | 40pA |
| Voltage - Supply, Single/Dual (±) | ±2V~20V |
| Output Current per Channel | 25mA |
| Input Offset Voltage (Vos) | 75μV |
| Bandwidth | 500 kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 500 kHz |
| Voltage Gain | 132.04dB |
| Average Bias Current-Max (IIB) | 0.0002μA |
| Power Supply Rejection Ratio (PSRR) | 135dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 20V |
| Voltage - Input Offset | 40μV |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.00015μA |
| Dual Supply Voltage | 9V |
| Input Capacitance | 3pF |
| Neg Supply Voltage-Max (Vsup) | -20V |
| Input Voltage Noise Density | 17nV/sqrt Hz |
| Height | 2.35mm |
| Length | 10.5mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
OP497FSZ Overview
Op amp is packaged in 16-SOIC (0.295, 7.50mm Width) case. There are two types of operational amplifiers in this circuit. The op amp is delivered to you in a Tube case. The number of terminations is approaching the 16 mark. The total number of pins on linear amplifier is 16. Please take in mind that op amp should be run at 15V. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. It has 16 pins that make up the linear amplifier. The input offset voltage is 75μV. Surface Mount is the recommended mounting type for this linear amplifier. With regard to operating temperature, this op amp functions well at -40°C~85°C. Using a supply current of 2.5mA , this buffer op amp will be able to operate. 132.04dB should be the voltage gain. There are 4 channels on the operational amplifiers. The current is quiescent at 625μA.
OP497FSZ Features
16 Pins
supply voltage of 15V
132.04dB voltage gain
OP497FSZ Applications
There are a lot of Analog Devices Inc. OP497FSZ Instrumentational OP Amps applications.
- Instrumentation
- PDA
- Differentiator circuits
- Portable docking station
- Fission chambers
- Strain gauges
- Computer workstations
- Subtraction operation circuits
- earphone
- Automation control systems
