OP497GPZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Base Part Number | OP497 |
| Pin Count | 14 |
| Operating Supply Voltage | 15V |
| Number of Channels | 4 |
| Operating Supply Current | 2.5mA |
| Quiescent Current | 625μA |
| Supply Current-Max | 3mA |
| Slew Rate | 0.15V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 135 dB |
| Current - Input Bias | 60pA |
| Voltage - Supply, Single/Dual (±) | ±2V~20V |
| Output Current per Channel | 25mA |
| Input Offset Voltage (Vos) | 75μV |
| Bandwidth | 500 kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 500 kHz |
| Voltage Gain | 132.04dB |
| Average Bias Current-Max (IIB) | 0.0003μA |
| Power Supply Rejection Ratio (PSRR) | 135dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 20V |
| Voltage - Input Offset | 80μV |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.0002μA |
| Dual Supply Voltage | 9V |
| Input Capacitance | 3pF |
| Input Voltage Noise Density | 17nV/sqrt Hz |
| Height | 3.43mm |
| Length | 16.89mm |
| Width | 7.24mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
OP497GPZ Overview
Packaged in a 14-DIP (0.300, 7.62mm) case, the buffer op amp is ready to use. A General Purpose-type buffer amplifier is shown here. A Tube case is used to deliver the buffer op amp. In recent months, the number of terminations has approached 14. A total of 14 pins are located on this board. Please take in mind that op amp should be run at 15V. This particular linear amplifier is a type of Operational Amplifier device, to be precise. An 14-pin op amp ic is included in the package. With regard to input offset voltage, instrumentation amplifier is rated at 75μV. It is recommended that this electronic component be mounted using the Through Hole mounting type. With regard to operating temperature, this op amp functions well at -40°C~85°C. As long as the supply current of the chip does not exceed 2.5mA, this op amp ic can operate. The voltage gain should stay at 132.04dB. The op amp ic has 4 channels on it. The operating supply voltage of the buffer op amp is rated at 15V. As a result, linear amplifier's quiescent current is 625μA.
OP497GPZ Features
14 Pins
supply voltage of 15V
132.04dB voltage gain
OP497GPZ Applications
There are a lot of Analog Devices Inc. OP497GPZ Instrumentational OP Amps applications.
- Cinema or auditorium audio system
- Voltage regulation circuit
- Broadcasting
- Industrial applications including automation
- Commercial audio systems
- RF cable systems
- Oscilloscopes
- Portable electronic products powered by batteries
- Active probe
- Polarized electrodes
