OP497GSZ-REEL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | OP497 |
| Pin Count | 16 |
| Power Supplies | +-15V |
| Number of Channels | 4 |
| Operating Supply Current | 2.5mA |
| Quiescent Current | 625μA |
| Supply Current-Max | 3mA |
| Slew Rate | 0.15V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 135 dB |
| Current - Input Bias | 60pA |
| Voltage - Supply, Single/Dual (±) | ±2V~20V |
| Output Current per Channel | 25mA |
| Input Offset Voltage (Vos) | 75μV |
| Gain Bandwidth Product | 500kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 500 kHz |
| Voltage Gain | 132.04dB |
| Average Bias Current-Max (IIB) | 0.0003μA |
| Power Supply Rejection Ratio (PSRR) | 135dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 20V |
| Voltage - Input Offset | 80μV |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.0002μA |
| Input Capacitance | 3pF |
| Neg Supply Voltage-Max (Vsup) | -20V |
| Input Voltage Noise Density | 17nV/sqrt Hz |
| Height Seated (Max) | 2.65mm |
| Length | 10.3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
OP497GSZ-REEL Overview
There is a 16-SOIC (0.295, 7.50mm Width) case package that contains the instrumentation amplifiers. General Purpose-type instrumentation amplifiers are used in this application. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. There is a growing number of terminations approaching the number of 16. Buffer amplifier has a total of 16 pins. Please take in mind that op amp should be run at 15V. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. 16 pins are available on the instrumentation amplifier. The input offset voltage is 75μV. This electronic part is best mounted with type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. The buffer amplifier is capable of operating from a supply current of 2.5mA . Voltage gain should remain at 132.04dB. The op amp ic has 4 channels on it. This linear amplifier pack is based on the TAPE AND REEL axis. The current is quiescent at 625μA.
OP497GSZ-REEL Features
16 Pins
supply voltage of 15V
132.04dB voltage gain
OP497GSZ-REEL Applications
There are a lot of Analog Devices Inc. OP497GSZ-REEL Instrumentational OP Amps applications.
- Switching amplifier
- Voltage regulation circuit
- High speed sample
- Computer workstations
- Scintillation detectors
- Differentiator circuits
- Weak signal detection
- Professional videography
- Comparator
- Medical imaging
